Table of Contents
Advertisement
Operation
Custom Resolution Width
This setting defines the input's width in pixels.
1. Access the
Custom Resolution
2. Turn the <MENU> knob until Width (H) is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the width, from
800–3840 (This range is determined by the Screen Settings).
5. Press the <MENU> knob.
6. Press <ESC> to return to the previous menu level.
Custom Resolution Height
This setting defines the input's height in pixels.
1. Access the
Custom Resolution
2. Turn the <MENU> knob until Height (V) is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the height, from
600–1920 (This range is determined by the Screen Settings).
5. Press the <MENU> knob.
6. Press <ESC> to return to the previous menu level.
Custom Refresh Rate
This setting defines the rate at which the input refreshes itself.
1. Access the
Custom Resolution
2. Turn the <MENU> knob until Custom Refresh Rate is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to select a refresh rate, from 60Hz,
59.94Hz, 50Hz, or 30Hz.
5. Press the <MENU> knob.
6. Press <ESC> to return to the previous menu level.
Apply
To make custom Input Settings permanent (until they are changed), Apply must be selected.
From the
Custom Resolution
1. Turn the <MENU> knob until Apply is selected.
2. Press the <MENU> knob.
Output Settings
The Output Settings determine the area and offset of the video output. To access the Output Settings
menu, press <OUTPUT/1> or do the following:
1. Press the <MENU> knob to access the menu.
2. Turn the <MENU> knob until Output Settings is selected.
3. Press the <MENU> knob.
Scaling
Enabling Scaling allows the video output to be fitted more specifically to the size of the connected panel
assembly. This also allows options such as Auto Fit to be enabled.
1. Access the
Output Settings
2. Turn the <MENU> knob until Scaling is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to select Disable or Enable.
5. Press the <MENU> knob.
6. Press <ESC> to return to the previous menu level.
Auto Fit
The Auto Fit function automatically fits the video output to the connected panel assembly, based on the
Screen Settings and Input Settings. To enable or disable Auto Fit:
1. Access the
Output Settings
2. Turn the <MENU> knob until Auto Fit is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to select Disable or Enable.
5. Press the <MENU> knob.
6. Press <ESC> to return to the previous menu level.
Vivid Drive 28N User Manual Rev. 1
menu.
menu.
menu.
menu.
menu.
menu.
Page 20 of 37
Advertisement
Table of Contents
