Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvet DJ INTIMIDATOR SPOT 360X IP
Summary of Contents for Chauvet DJ INTIMIDATOR SPOT 360X IP
- Page 1 User Manual...
-
Page 2: Table Of Contents
RF Bind ........................Reset ........................Factory Reset ......................System Information ....................Master/Slave Mode ..................Zero Adjust Mode..................5. Maintenance................Product Maintenance ..................6. Technical Specifications ............Contact Us ..................Warranty & Returns..................Intimidator Spot 360X IP User Manual Rev. 1... -
Page 3: Before You Begin
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and Intimidator Spot 360X IP are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies. -
Page 4: Safety Notes
Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Intimidator Spot 360X IP User Manual Rev. 1... -
Page 5: Introduction
WARNING! DO NOT plug anything other than a data connection into the USB C port. Doing so may cause damage to the product. Product Dimensions 15.9 in 406 mm 8.5 in 11.8 in 217 mm 299 mm Intimidator Spot 360X IP User Manual Rev. 1... -
Page 6: Setup
It is possible to power link up to 5 Intimidator Spot 360X IP products on 120 VAC or up to 9 Intimidator Spot 360X IP products on 230 VAC. The power linking diagram corresponds to the North American version of the product ONLY! If using the product in other markets, consult with the local Chauvet distributor as power linking connectors and requirements may differ by country or region. -
Page 7: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Intimidator Spot 360X IP may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming. -
Page 8: Operation
Press to scroll down the list of options or to find a lower value <ENTER> Press to activate a menu option or a selected value Menu Map Refer to the Intimidator Spot 360X IP product page on www.chauvetdj.com for the latest menu map. Main Level... -
Page 9: Configuration (Dmx)
Base Fan1: _ _ _ _ Displays base fan information Configuration (DMX) The Intimidator Spot 360X IP works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/ DMX_Primer_rev05_WO.pdf. -
Page 10: Dmx Channel Assignments And Values
Gobo bounce, short to long, slow to fast No function 3-facet prism Prism rotation, slow to fast Prism Reverse prism rotation, slow to fast 3-facet prism No function Intimidator Spot 360X IP User Manual Rev. 1... - Page 11 Sound-active movement macro 2 Sound-active movement macro 3 Sound-active movement macro 4 Sound-active movement macro 5 Sound-active movement macro 6 Sound-active movement macro 7 Sound-active movement macro 8 Intimidator Spot 360X IP User Manual Rev. 1...
-
Page 12: Configuration (Standalone)
4. Use <UP> or <DOWN> to select Sound. 5. Press <ENTER>. Sound Sensitivity To set the sound sensitivity on the Intimidator Spot 360X IP, follow the instructions below: 1. Press <MENU>. 2. Use <UP> or <DOWN> to select Setup. 3. Press <ENTER>. -
Page 13: Tilt Reverse
6. Use <UP> or <DOWN> to select from 540 (540°), 360 (360°), or 180 (180°). 7. Press <ENTER>. Tilt Angle To set the tilt angle range on the Intimidator Spot 360X IP, follow the instructions below: 1. Press <MENU>. 2. Use <UP> or <DOWN> to select Setup. -
Page 14: Rf Bind
The Master/Slave mode allows a single Intimidator Spot 360X IP product (the “master”) to control the actions of one or more Intimidator Spot 360X IP products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in standalone mode, while the slave products will be set to operate in slave mode. -
Page 15: Zero Adjust Mode
Operation Zero Adjust Mode The Intimidator Spot 360X IP contains a passcode protected mode which allows the user to calibrate and adjust several of the product’s operating parameters. In order to access this mode, do the following: 1. Press and hold <MENU> for at least 3 seconds. -
Page 16: Maintenance
7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Do not spin the cooling fans using compressed air because it they could be damaged. Intimidator Spot 360X IP User Manual Rev. 1... -
Page 17: Technical Specifications
113 °F (22 °C) Fan-assisted convection I/O Connector Channel Range 3-pin XLR 08 or 14 Ordering Product Name Item Code UPC Number Intimidator Spot 360X IP 08011988 781462223366 UL 1573 CSA C22.2 No. 166 E113093 Intimidator Spot 360X IP User Manual Rev. 1... -
Page 18: Contact Us
For warranty terms and conditions and return information, please visit our website. For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Intimidator Spot 360X IP User Manual Rev. 1...