Table of Contents
Advertisement
CHANGE TIME
To set the time to be displayed by the Vivid Drive 23N, follow the instructions below.
1.
Access the
DATE&TIME
2.
Use the <SELECT> knob to select CHANGE TIME.
3.
Press the <SELECT> knob.
4.
Turn the <SELECT> knob to increase or decrease the hour.
5.
Press the <SELECT> knob.
6.
Turn the <SELECT> knob to increase or decrease the minute.
7.
Press the <SELECT> knob.
8.
Turn the <SELECT> knob to increase or decrease the second.
9.
Press the <SELECT> knob.
10. If necessary, repeat steps 2 to 9 until the date is set correctly.
LOCK FRONT PANEL
To lock the front panel from use, do the following.
1.
Access the
SYSTEM
2.
Use the <SELECT> knob to select LOCK FRONT PANEL.
3.
Press the <SELECT> knob.
4.
Press the <SELECT> knob to confirm, or <MENU> to cancel.
To unlock, hold <MENU> for 3 seconds.
HOT BACKUP
The HOT BACKUP function allows changes to settings to be preserved after power cycling without
actively saving the configuration.
To enable or disable HOT BACKUP, follow the instructions below.
1.
Access the
SYSTEM
2.
Use the <SELECT> knob to select HOT BACKUP.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select HOT BACKUP.
5.
Press the <SELECT> knob.
6.
Use the <SELECT> knob to select either OFF (disables the function) or ON (enables the
function).
7.
Press the <SELECT> knob.
To designate the priority order of the input video signals, do the following:
1.
Enable HOT BACKUP.
2.
From the first HOT BACKUP menu, use the <SELECT> knob to select a backup, from
BACKUP_1–5 (1 is first, 5 is last).
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select which video source to designate as the selected priority, from
CV1, HDMI, YPbPr, VGA, or SDI.
5.
Press the <SELECT> knob.
6.
Repeat steps 2 to 5 until the backups are set as desired.
EDID FOLLOW
The EDID FOLLOW function allows the Vivid Drive 23N to detect the specifications of connected panels.
To enable or disable EDID FOLLOW, do the following:
1.
Access the
SYSTEM
2.
Use the <SELECT> knob to select EDID FOLLOW.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select either OFF (disables the function) or ON (enables the
function).
5.
Press the <SELECT> knob.
Page 23 of 31
menu and enable TIMING CONTROL.
Settings.
Settings.
Settings.
Operation
Vivid Drive 23N User Manual Rev. 1
Advertisement
Table of Contents
