Table of Contents
Advertisement
Introduction
Rear Overview
1
2
7
8
Rear Panel Description
#
Port
Function
1
RS232
RJ12 port for remote control system connection.
2
USB B 1
USB B port for firmware updates
DVI input connector for video signal from DVI1 OUT (11) or a pre-scaled video
3
DVI In
source
4
USB B 2
USB B port for connecting to NovaLCT Mars
5 Ethernet Out 2
Ethernet ports for sending video signal to video panels (6 is port 1, 5 is port 2)
6 Ethernet Out 1
7
CVBS IN
BNC connector for CVBS input
8 VGA/YPbPr IN DE-15 connector for video input from a VGA or YPbPr source
9
HDMI IN
HDMI input port to scaler. This port must be used to use the scaler.
10
HDMI LOOP
HDMI output port for sending non-scaled HDMI video signal to other devices
DVI output connector for sending scaled video signal to the DVI In port (3). This port
11
DVI1 OUT
must be connected to DVI In (3) for the scaler to be used.
12 DVI2+VGA OUT DVI output connector for sending scaled video signal to other devices
13
Power In
Power input socket for a voltage range of 100 to 240 VAC, 50/60 Hz
Vivid Drive 23N User Manual Rev. 1
3
4
9
10
11
5
6
12
13
Page 4 of 31
Advertisement
Table of Contents
