Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Chauvet DJ COLORband T3 BT
Summary of Contents for Chauvet DJ COLORband T3 BT
- Page 1 User Manual...
-
Page 2: Table Of Contents
Control Panel Operation................Menu Map ..................... Configuration (DMX) ..................Starting Address....................DMX Channel Assignments and Values ............13Ch........................COLORband T3 BT Zones for DMX Control (13Ch) ..........5Ch........................3Ch........................Configuration (Bluetooth) ................Configuration (Standalone) ................Automatic Programs................... Auto-Program Speed .................. -
Page 3: Before You Begin
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and COLORband T3 BT are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies. -
Page 4: Product At A Glance
Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document. Page 2 of 14 COLORband T3 BT User Manual Rev. 1... -
Page 5: Introduction
Safety Loop Power In DMX In/Out LED Display Fuse Holder Power Out Microphone Menu Buttons Product Dimensions 39.3 in 1000 mm 2 in 51 mm 6.2 in 157 mm COLORband T3 BT User Manual Rev. 1 Page 3 of 14... -
Page 6: Setup
3. Setup AC Power The COLORband T3 BT has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 7: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The COLORband T3 BT may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming purposes. -
Page 8: Operation
Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective owners. Configuration (DMX) The COLORband T3 BT works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/ DMX_Primer_rev05_WO.pdf. -
Page 9: Dmx Channel Assignments And Values
255 Auto program 8 250 Program speed, slow to fast Auto Speed 255 Sound-active mode Dimmer 255 0–100% COLORband T3 BT Zones for DMX Control (13Ch) Channel Function Value Percent/Setting 255 0–100% Green 255 0–100% Blue 255 0–100%... -
Page 10: Configuration (Bluetooth)
Operation Configuration (Bluetooth) The COLORband T3 BT can be operated with the BTAir application over a Bluetooth connection. Download and install the BTAir app from your preferred app store. Press <MENU> repeatedly until bLE shows on the display. Press <ENTER>. -
Page 11: Irc-6 Infrared Remote Control
Operation IRC-6 Infrared Remote Control The COLORband T3 BT is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode, follow the instructions below: Press <MENU> repeatedly until SEt shows on the display. Press <ENTER> to accept. -
Page 12: Master/Slave Mode (Wired)
The Master/Slave mode allows a single COLORband T3 BT product (the “master”) to control the actions of one or more COLORband T3 BT products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in Stand-Alone or with the IRC-6, while the slave products will be set to operate in Slave mode. -
Page 13: Maintenance
Softly drag any dirt or grime to the outside of the transparent surface. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. COLORband T3 BT User Manual Rev. 1 Page 11 of 14... -
Page 14: Technical Specifications
Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range 3-pin XLR 3, 5 or 13 Ordering Product Name Item Code UPC Number COLORband T3 BT 10031428 7814622117762 Page 12 of 14 COLORband T3 BT User Manual Rev. 1... -
Page 15: Returns
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). COLORband T3 BT User Manual Rev. 1 Page 13 of 14... -
Page 16: Contact Us
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Fol- low the instructions to request support or to return a product. Visit our website for contact details. Page 14 of 14 COLORband T3 BT User Manual Rev. 1...