Table of Contents
Advertisement
PIP LAYOUT
The LAYOUT setting determines where the second video input will appear on the connected panel
assembly. To set the LAYOUT, do the following:
1.
Access and enable the
2.
Use the <SELECT> knob to select LAYOUT.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select a layout arrangement, from PIP L+T (second input appears in
the top left), PBP L+R (output is split left and right), or PBP T+B (output is split top and bottom).
5.
Press the <SELECT> knob.
SWAP IMAGE
The SWAP IMAGE setting toggles which video input is set as the Picture In Picture input. To toggle SWAP
IMAGE, follow the instructions below.
1.
Access and enable the
2.
Use the <SELECT> knob to select SWAP IMAGE.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select either OFF (does not switch inputs) or ON (switches inputs).
5.
Press the <SELECT> knob.
ALPHA
The ALPHA setting controls the transparency of the Picture In Picture image. To set the ALPHA, do the
following:
1.
Access and enable the
2.
Use the <SELECT> knob to select ALPHA.
3.
Press the <SELECT> knob.
4.
Turn the <SELECT> knob to increase or decrease the transparency, from 0–16.
5.
Press the <SELECT> knob.
SELECT
The SELECT setting determines which video input can be scaled by the SCALE function. To select which
input to scale, follow the instructions below.
1.
Access and enable the
2.
Use the <SELECT> knob to select SELECT.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select either IMAGE A or IMAGE B.
5.
Press the <SELECT> knob.
TEXT OVERLAY
The TEXT OVERLAY function allows display areas to be defined for text output only. To access and
enable or disable the TEXT OVERLAY function, do the following:
1.
Access the
OUTPUT
2.
Use the <SELECT> knob to select TEXT OVERLAY.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select TEXT OVERLAY.
5.
Press the <SELECT> knob.
6.
Use the <SELECT> knob to select either OFF (disables TEXT OVERLAY) or ON (enables TEXT
OVERLAY).
7.
Press the <SELECT> knob.
TEXT OVERLAY PRESET
The PRESET setting selects a pre-set color scheme for the TEXT OVERLAY. To select a PRESET, follow
the instructions below.
1.
Access and enable the
2.
Use the <SELECT> knob to select PRESET.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select User (see
or 2), BkOnWh1–2 (black on white 1 or 2), GrnOnBk1–2 (green on black 1 or 2), GrnOnWh1–2
(green on white 1 or 2), RedOnBk1–2 (red on black 1 or 2) or RedOnWh1–2 (red on white 1
or 2).
5.
Press the <SELECT> knob.
Page 17 of 31
Picture In Picture
function.
Picture In Picture
function.
Picture In Picture
function.
Picture In Picture
function.
Settings.
TEXT OVERLAY
function.
Custom
Color), WhOnBk1–2 (white on black 1
Vivid Drive 23N User Manual Rev. 1
Operation
Advertisement
Table of Contents
