Chauvet DJ 4BAR LT BT User Manual
  1. Manuals
  2. Brands
  3. Chauvet DJ Manuals
  4. DJ Equipment
  5. 4BAR LT BT
  6. User manual

Chauvet DJ 4BAR LT BT User Manual

Hide thumbs Also See for 4BAR LT BT:
Table of Contents

Advertisement

Quick Links

See also: Quick Reference Manual
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Chauvet DJ 4BAR LT BT

Summary of Contents for Chauvet DJ 4BAR LT BT

  • Page 1 User Manual...

  • Page 2: Table Of Contents

    Dimmer........................... IRC-6 Infrared Remote Control ................IRC-6 Operation ......................10 Footswitch Operation ....................Master/Slave Mode (Wired) ..................Master/Slave Mode (D-Fi USB)................5. Maintenance....................Product Maintenance ....................6. Technical Specifications................Returns ......................Contact Us......................4BAR LT BT User Manual Rev. 1...

  • Page 3: Before You Begin

    Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and 4BAR LT BT are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.

  • Page 4: Safety Notes

    Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Page 2 of 16 4BAR LT BT User Manual Rev. 1...

  • Page 5: Introduction

    WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause damage to the product. Product Dimensions 36.1 in 918.1 mm 3.7 in 95 mm 10.8 in 274.3 mm 4BAR LT BT User Manual Rev. 1 Page 3 of 16...

  • Page 6: Setup

    3. Setup AC Power The 4BAR LT BT has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

  • Page 7: Mounting

    Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The 4BAR LT BT may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming.

  • Page 8: Operation

    Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective owners. Configuration (DMX) The 4BAR LT BT works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/ DMX_Primer_rev05_WO.pdf.

  • Page 9: D-Fi Usb Connectivity

    Operation D-Fi USB Connectivity The 4BAR LT BT is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from Chauvet DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-Fi receiving/transmitting channel, then plug it into the D-Fi USB port.

  • Page 10: Dmx Channel Assignments And Values

    000  015 No function Strobe 016  255 Strobe, slow to fast Channel Function Value Percent/Setting 000  255 0–100% Green 000  255 0–100% Blue 000  255 0–100% Page 8 of 16 4BAR LT BT User Manual Rev. 1...

  • Page 11: Configuration (Bluetooth)

    Operation Configuration (Bluetooth) The 4BAR LT BT can be operated with the BTAir application over a Bluetooth connection. 1. Download and install the BTAir app from your preferred app store. 2. Press <MENU> repeatedly until bLE shows on the display.

  • Page 12: Irc-6 Infrared Remote Control

    Operation IRC-6 Infrared Remote Control The 4BAR LT BT is compatible with the IRC-6 infrared remote control from Chauvet. To set the 4BAR LT BT to IR mode, follow the instructions below: 1. Press <MENU> repeatedly until SEt shows on the display.

  • Page 13: Footswitch Operation

    2. Disconnect the product from power. 3. Reconnect the product to power to operate without the footswitch. The 4BAR LT BT footswitch will work properly in any mode. No settings need to be modified before using the footswitch. 4BAR LT BT User Manual Rev. 1...

  • Page 14: Master/Slave Mode (Wired)

    Master/Slave Mode (D-Fi USB) The D-Fi USB allows a single 4BAR LT BT product (the “master”) to control the actions of one or more 4BAR LT BT products (the “slaves”) without the need of a DMX controller or DMX cables. The master (transmitter) product will be set to operate in Stand-Alone mode, while the slave (receiver) products will be set to operate in Slave mode.

  • Page 15: Maintenance

    6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. 4BAR LT BT User Manual Rev. 1 Page 13 of 16...

  • Page 16: Technical Specifications

    Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range 3-pin XLR 3, 5 or 15 Ordering Product Name Item Code UPC Number 4BAR LT BT 10031522 781462218706 Page 14 of 16 4BAR LT BT User Manual Rev. 1...

  • Page 17: Returns

    Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). 4BAR LT BT User Manual Rev. 1 Page 15 of 16...

  • Page 18: Contact Us

    Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Follow the instructions to request support or to return a product. Visit our website for contact details. Page 16 of 16 4BAR LT BT User Manual Rev. 1...

Table of Contents