Table of Contents
Advertisement
Operation
BLEND MODE
The BLEND MODE determines which, the background or the text, of the TEXT OVERLAY is transparent.
To select the BLEND MODE, do the following:
1.
Access and enable the
2.
Use the <SELECT> knob to select BLEND MODE.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select either MODE1 (the text is solid, the background is transparent)
or MODE2 (the text is transparent, no background).
5.
Press the <SELECT> knob.
BLEND LEVEL
The BLEND LEVEL setting sets the transparency of the TEXT OVERLAY. To set the BLEND LEVEL,
follow the instructions below.
1.
Access and enable the
2.
Use the <SELECT> knob to select BLEND LEVEL.
3.
Press the <SELECT> knob.
4.
Turn the <SELECT> knob to increase or decrease the transparency, from 0–15.
5.
Press the <SELECT> knob.
ABOVE/BELOW
The ABOVE/BELOW setting selects the vertical location (ABOVE or BELOW) of the peripheral secondary
content. To select the ABOVE/BELOW mode, do the following:
1.
Access and enable the
2.
Use the <SELECT> knob to select ABOVE/BELOW.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select either BELOW or ABOVE.
5.
Press the <SELECT> knob.
AND/OR
The AND/OR setting selects the horizontal location (left or right) of the peripheral secondary content. To
select the AND/OR mode, follow the instructions below.
1.
Access and enable the
2.
Use the <SELECT> knob to select AND/OR.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select either OR (left) or AND (right).
5.
Press the <SELECT> knob.
Custom Color
To set a custom color for the TEXT OVERLAY, do the following:
1.
Access and enable the
2.
Use the <SELECT> knob to select a color level to set, from RED, GREEN, or BLUE.
3.
Press the <SELECT> knob.
4.
Turn the <SELECT> knob to increase or decrease the value of the selected color.
5.
Press the <SELECT> knob.
6.
Repeat steps 2 to 5 until the TEXT OVERLAY is colored as desired.
DISPLAY MODE
The DISPLAY MODE settings determines what is output from DVI1 OUT. To access and select the
DISPLAY MODE, follow the instructions below.
1.
Access the
OUTPUT
2.
Use the <SELECT> knob to select DISPLAY MODE.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select MODE.
5.
Press the <SELECT> knob.
6.
Use the <SELECT> knob to select a mode, from BLACK SCREEN (no output), LIVE IMAGE
(video output), FREEZE IMAGE (freezes the output on a single frame), FLAT IMAGE (a single
solid color), or TEST PATTERN (a test pattern).
7.
Press the <SELECT> knob.
Vivid Drive 23N User Manual Rev. 1
TEXT OVERLAY
function.
TEXT OVERLAY
function.
TEXT OVERLAY
function.
TEXT OVERLAY
function.
TEXT OVERLAY
function.
Settings.
Page 18 of 31
Advertisement
Table of Contents
