Target Screen Operation - Mitsubishi Electric SW0DNC-MNETH-B User Manual

9 UTILITY OPERATIONS

9.2.10 Target screen operation

Item
Channel
Logical Sta. No.
Network No.
Sta. No.
Multiple PLC specify
Redundant PLC specify
Set Button
Change Button
Delete Button
9 - 19
This operation sets the logical station No. for access to a multiple CPU system or
Redundant CPU system.
Sets the channel (MELSECNET/H board) perform the target settings.
Input the logical sta. No. which is setting or changing the settings.
Input the network No. of the station doing the accessing.
Input the station No. of the network module controlled by the multiple CPU system or
redundant CPU system.
Specify a target programmable controller CPU No. in the multiple CPU system.
Specify a target redundant CPU in the redundant CPU system.
Registers the setting contents in the list of external devices.
Select the line to change. When this button is clicked, the data that are registered can be
changed. (The same operation is performed when the line being changed is double
clicked.)
Select the line to be deleted. When this button is clicked, the registered logical station
No. can be deleted.
Content
MELSEC
9 - 19