Mitsubishi Electric SW0DNC-MNETH-B User Manual page 118

9 UTILITY OPERATIONS
Item
Channel
Block 1 setting (Block 2 setting) Switches the block that is set.
Total station
Monitoring Time
I/O Master Sta.
Sta. No.
Sending Range
Send Range for
(M L)
Each Station
Sending Range
(M L)
Set button
Send Range for Each Station
Change button
Delete button
Setting Clear Button
9 - 10
(2) X, Y setting screen
Selects the channel (MELSECNET/H board) performing the settings.
Input the total number of stations (including the control station) in the network that the
MELSECNET/H board is the control station for.
Sets the link scan time monitoring time.
Input the station No. of the I/O master station.
Input the station No. of the station to be set or changed.
Assigns link devices (LX, LY) 1 to 1 between the I/O master station (M station) and other
stations.
Assigns link devices (LX, LY) 1 to 1 between the I/O master station (M station) and other
stations.
Registers the set contents in each station's transmission range.
Displays the set data contents up to the present time in one list.
Select the line to change, then when the button is clicked, the data which are registered
can be changed. (If the line to be changed is double clicked, the same operation can be
performed.)
Select the line to change, then when the button is clicked, the data which are set can be
deleted.
Initializes the contents of all the X and Y settings registered in the "Common parameter
setting" screen.
Content
MELSEC
9 - 10