Precautions For Use - Mitsubishi Electric SW0DNC-MNETH-B User Manual

PRECAUTIONS FOR USE

A - 11
(1) Transfer function between loops and routing transfers
The MELSECNET/H board cannot be used as a relay station for the transfer
function between data links and during routing transfers.
If the transfer function between data links and routing transfers are used, use
the network module as a relay station.
(2) Remote I/O Network
The MELSECNET/H board cannot be used in a remote I/O net.
It can be used only in a PLC to PLC network.
(3) Restrictions for functions depending on the personal computer or
the operating system
There are some restrictions for the functions or supported versions depending
on the operating system or personal computer to be used.
For the operating system, refer to Section 2.5.
(4) Driver installation and updating
Do not install or update the driver other than the method written in the
troubleshooting in this manual.
The consistency between the driver and utility cannot be identified, and CC-
Link IE Controller Network board may not operate properly.
A - 11