Mitsubishi Electric SW0DNC-MNETH-B User Manual page 27

1 OVERVIEW
1 - 3
(4) Compatible with multiple CPU systems.
By using station designations of logical station No. on the MNETH utility,
MELSECNET/H board is capable of communicating with a multiple CPU system.
(5) Compatible with redundant CPU systems.
Only by specifying whether the destination is a control or standby station using
the user program, access is simply made without considering the current
operating system state of the redundant CPU system.
(6) Compatible with MELSECNET/H Extended mode
The MELSECNET/H Extended mode is the extended MELECNET/H mode,
which is extended in the maximum number of link points per station. With this
mode, the maximum number of link points per station can be set to 2000 bytes or
more, i.e., up to 35840 bytes.
This mode is suitable for the system that needs many number of link points per
station.
(7) Drivers are provided for compatibility with each OS.
Each type of driver is provided, so it is easy to build a system that is compatible
with the user environment.
For details on the compatible operating system, refer to Section 2.5.
(8) User programming functions are provided.
Through Microsoft
functions, it is possible to carry out remote control of a programmable controller
CPU or read and write to devices, and user programs can be created easily.
Visual Basic and Microsoft
R R
MELSEC
Visual C++ compatible
R R
1 - 3