Mitsubishi Electric SW0DNC-MNETH-B User Manual page 153

12 APPLICATION FUNCTIONS
12 - 15
(2) Routing parameter settings
(a) Setting screen
A maximum of 64 "Transfer to Network No." can be set on the "Routing
Parameter Setting" of the MNETH utility.
Note that the same Transfer to network number cannot be designated more
than once (multiple). Therefore, the host can become the request source or
can be accessed to other station through the host with 64 types of different
"Transfer to Network No."
Setting item
Transfer to Network No.
Intermediate Network No.
Intermediate Station No.
(b) Setting method
Set the routing parameters according to the procedure described below.
Request
source
Network No.
To access "network No.
1
2
Valid setting range
," it is necessary to route through station No.
Transfer
Intermediate Intermediate
to
network No.
network No.
1 to 239
1 to 239
1 to 64
Relay station
Network No.
Request
destination
of network No. .
station No.
MELSEC
12 - 15