Mitsubishi Electric SW0DNC-MNETH-B User Manual page 72

6 PROCEDURE AND SETTINGS UP TO THE POINT OF OPERATION
6 - 16
(2) Cable connection
(a) Connection method
Connect the coaxial cable as shown below.
Always install a terminal resistor (sold separately: A6RCON-R75) to the
stations connected at both ends.
The F-type connector comes with the Q80BD-J71BR11.
1) Without a repeater module
Control station
Station No. 1
Personal
computer
F-type connector
Q80BD-
J71BR11
Terminal resistor
A6RCON-R75
(sold separately)
2) With a repeater module (series connection)
Control station
Station No. 1
Personal
computer F-type connector
Q80BD-
J71BR11
Terminal resistor
A6RCON-R75
(sold separately)
(A6BR10 accessory)
REMARK
For details about the repeater module (A6BR10), refer to the following user's manual
attached to the product:
Model A6BR10/A6BR10-DC MELSECNET/10 Coaxial Bus System
Repeater Module User's Manual (IB-66499)
Normal station
Station No. 2
QJ71BR11
F-type connector
Coaxial cable
Normal station Normal station
Station No. 2 Station No. 3
QJ71BR11
F-type connector
Coaxial cable
A6BR10
T-type
connector
Terminal resistor
A6RCON-R75 (sold separately)
Normal station
Station No. n
QJ71BR11
Normal station
Station No. n
QJ71BR11 QJ71BR11
F-type connector
Coaxial cable
T-type
connector
(A6BR10 accessory)
MELSEC
n ≤ 32
F-type connector
Terminal resistor
A6RCON-R75
(sold separately)
n ≤ 32
F-type connector
Terminal resistor
A6RCON-R75
(sold separately)
6 - 16