9 UTILITY OPERATIONS
9.2.7 Each station status screen operation
Item
Channel
Own Station Information
Each Station Status
9 - 14
This screen displays communication status and loop status for each station.
Sets the channel (MELSECNET/H board) perform each station status.
Displays the host information.
Displays the communication status and loop status for every link station that is set using
parameters.
(Red)
Transfer Status Invalid Sta.·············· Indicates a baton-pass status error.
(Yellow)
Loop Status Invalid Sta.··················· Indicates a forward/reverse loopstatus error.
(White)
Transfer Status Normal Sta.············ Indicates the station in normal communication.
(Blue)
Select Control Sta.··························· Indicates the station that is set as the control station.
(Aqua)
Current Control Sta.························· Indicates the station that is actually operating
(Gray)
Reserve Sta.···································· Indicates the station that is set as a reserved station.
Content
as the control station.
However, this is valid only when the host is executing
cyclic communication.
MELSEC
9 - 14