Instruction - Rotax 912 i Series Installation Manual

4.2)

Instruction

Engines require instructions regarding their installation, application, use,
General note
operation, maintenance and repair.
Technical documentation and directions are useful and necessary comple-
mentary elements for personal instruction, but can by no means substitute
theoretical and practical instructions.
These instructions should cover explanation of the technical context,
advice for operation, maintenance, use and operational safety of the
engine.
In this technical Manual passages concerning safety are especially
Safety notice
marked. Pass on safety warnings to other users!
This engine must only be operated with accessories supplied, recom-
Accessories
mended and released by BRP-Powertrain. Modifications are only allowed
after consent by the engine manufacturer.
Spare parts
Tools
State of delivery
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
INSTALLATION MANUAL
Spare parts must meet with the requirements defined
NOTICE
WARNUNG
by the engine manufacturer. This is only warranted by
use of GENUINE-ROTAX spare parts and/or accesso-
ries (see IPC) or suitable equivalent in the manufactur-
er's opinion otherwise, any limited warranty by BRP-
Powertrain is null and void (see Warranty Conditions).
Spare parts are available at the authorized ROTAX
Distributor and their Service Center.
Any warranty by BRP-Powertrain becomes null and
void if spare parts and or accessories other than
GENUINE-ROTAX spare parts and/or accessories are
used (see latest Warranty Conditions).
In principle use only tools and appliances which are ei-
NOTICE
WARNUNG
ther cited in the Manual or in the Illustrated Parts Cat-
alog.
Engine and gearbox are delivered in "dry" conditions
WARNUNG WARNING
(without oil). Before putting the engine into operation it
must be filled with oil. Use only oil as specified (consult
Operators Manual and SI-912 i-001 "Selection of suit-
able operating fluids" current issue).
00-00-00
page 14
January 01/2012