Instruction - Rotax 914 F Installation Manual

Hide thumbs Also See for 914 F:
Table of Contents

Advertisement

In addition to observing the instructions in our Manual, general safety and accident
preventative measures, legal regulations and regulations of any aeronautical
authority must be observed.
Where differences exist between this Manual and regulations provided by any
authority, the more stringent regulation should be applied.
This engine may be equipped with an Airborne air pump. The safety warning
accompanying the air pump must be given to the owner/operator of the aircraft into
which the air pump is installed.
4.3)

Instruction

Engines require instructions regarding their application, use, operation, maintenance
and repair.
Technical documentation and directions are useful and necessary complemen-
tary elements for personal instruction, but can by no means substitute theoretical
and practical instructions.
These instructions should cover explanation of the technical context, advice for
operation, maintenance, use and operational safety of the engine.
All technical directives relevant for safety are especially emphasized. Pass on
safety instructions to other users, without fail.
This engine must only be operated with accessories supplied, recommended and
released by ROTAX. Modifications are only allowed after consent by the engine
manufacturer.
ATTENTION: Spare parts must meet with the requirements defined by the engine
WARNING: Engine and gear box are delivered in "dry" conditions (without oil).
NOTE:
WARNING: Exclusively use tools and supplementary materials as listed in the
WARNING: This Manual for engine installation is only part of the Technical
Modification-No.
- 0 -
manufacturer. This is only warranted by use of GENUINE ROTAX
spare parts and/or accessories (see spare parts list).
They are available only at the authorized ROTAX Distribution- and
Service partners.
The use of anything other than genuine ROTAX spare parts and/or
accessories will render any warranty relating to this engine null and
void (see Warranty Conditions).
Before putting engine in operation it must be filled with oil. Use only
oil as specified (consult Operator's Manual).
For longer periods (longer than 2 months) of engine stop, preserva-
tion of engine is recommended (see chapter engine preservation in
Operator's Manual).
spare parts list.
Documentation and will be supplemented by the respective Opera-
tor's Manual, Maintenance Manual and Spare Parts List.
Pay attention to references to other documentation, found in various
parts of this Manual.
Reference
Install
Date
1996 05 10
914 F
Page
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents