Rotax 912 i Series Installation Manual page 2

Before starting with engine installation, please read the Installation Manual completely as it contains
important safety relevant information.
This Installation Manual for the ROTAX aircraft engines should only be used as a general
®
installation guide for the installation of ROTAX engines into airframes. It should not be used as
®
instruction for the installation of a ROTAX aircraft engine in a specific type of airframe or airplane.
®
BRP-Powertrain GmbH & Co. KG does not assume any warranty or liability in this context.
In no event shall the Installation Manual be used without following the specific instructions and/or
requirements of the manufacture of an airframe or airplane ("Manufacturer"). For verification and/or
for release of the engine installation, the respective Manufacturer must be contacted. Any
modifications or adaptations to the airframe or airplane shall be carried out and/or be verified and
released by the Manufacturer only.
Improper use of the Installation Manual and/or non compliance with the installation requirements of
the Manufacturers can cause personal injury or property damage. BRP-Powertrain GmbH & Co. KG
disclaims any liability for any and all damage and/or injuries (including death) resulting from the
improper use of Installation Manual and non compliance with the installation requirements of the
Manufacturer.
These technical data and the information embodied therein are the property of BRP-Powertrain
GmbH & CO. KG, Austria, acc, BGBI 1984 no. 448, and shall not, without prior written permission of
BRP-Powertrain GmbH & Co. KG, be disclosed in whole or in part to third parties. This legend shall
be included on any reproduction of these data, in whole or in part. The Manual must remain with the
engine/aircraft in case of sale.
Copyright 2014 © - all rights reserved.
ROTAX is a trade mark of BRP-Powertrain GmbH & Co. KG. In the following document the short
®
form of BRP-Powertrain GmbH & Co. KG = BRP-Powertrain is used.
Other product names in this documentation are used purely for ease of identification and may be
trademarks of the respective company or owner.
Approval of translation has been done to best knowledge and judgement - in any case the original
text in german language is authoritative.