Instruction - Rotax 912 Series Installation Manual

4.2)

Instruction

Engines require instructions regarding their installation, application, use,
General note
operation, maintenance and repair.
Technical documentation and directions are useful and necessary com-
plementary elements for personal instruction, but can by no means sub-
stitute theoretical and practical instructions.
These instructions should cover explanation of the technical context,
advice for operation, maintenance, use and operational safety of the
engine.
In this technical Manual passages concerning safety are especially
Safety notice
marked. Pass on safety warnings to other users!
This engine must only be operated with accessories supplied, recom-
Accessories
mended and released by BRP-Powertrain. Modifications are only allowed
after consent by the engine manufacturer.
Spare parts
Tools
State of delivery
Effectivity: 912 Series
Edition 2/Rev. 0
BRP-Powertrain
INSTALLATION MANUAL
Spare parts must meet with the requirements defined
NOTICE
WARNUNG
by the engine manufacturer. This is only warranted by
use of GENUINE-ROTAX spare parts and/or acces-
sories (see IPC) or suitable equivalent in the manu-
facturer's opinion otherwise, any limited warranty by
BRP-Powertrain is null and void (see Warranty Condi-
tions).
Spare parts are available at the authorized ROTAX
Distributor and their Service Center.
Any warranty by BRP-Powertrain becomes null and
void if spare parts and or accessories other than
GENUINE-ROTAX spare parts and/or accessories
are used (see latest Warranty Conditions).
In principle use only tools and appliances which are
NOTICE
WARNUNG
either cited in the Manual or in the Illustrated Parts
Catalog.
Engine and gearbox are delivered in "dry" conditions
WARNUNG WARNING
(without oil). Before putting engine in operation it must
be filled with oil. Use only oil as specified (consult Op-
erators Manual and SI-912-016 "Selection of suitable
operating fluids" current issue).
00-00-00
page 13
August 01/2012