Rotax 912 i Series Installation Manual page 105

NOTE:
1.8.1) Current input (Operating condition of the fuel pumps: ON)
12 V
14 V
16 V
Effectivity: 912 i Series
Edition 1/Rev. 2
BRP-Powertrain
INSTALLATION MANUAL
The cable length for the fuel pumps can be extended, if
necessary. For this a ROTAX plug kit is available.
Do not connect additional load (additional fuel pumps,
NOTICE
WARNUNG
lamps, LED, etc.) to the power supply of the fuel
pumps.
The wiring is manufactured for the GENUINE ROTAX
fuel pump assy. only.
Voltage
9.1 A
10.1 A
11.2 A
Current
73-00-00
Page 9
January 01/2014