Instruction - Rotax 912 ULS 3 Installation Manual

- In addition to observing the instructions in our Manual, general safety and
accident preventative measures, legal regulations and regulations of any
aeronautical authority must be observed.
- Where differences exist between this Manual and regulations provided by
any authority, the more stringent regulation should be applied.
- This engine may be equipped with an other than the ORIGINAL-ROTAX
vacuum pump. The safety warning accompanying the air pump must be
given to the owner/operator of the aircraft into which the air pump is installed.
4.3)

Instruction

Engines require instructions regarding their application, use, operation, mainte-
nance and repair.
- Technical documentation and directions are useful and necessary comple-
mentary elements for personal instruction, but can by no means substitute
theoretical and practical instructions.
- These instructions should cover explanation of the technical context, advice
for operation, maintenance, use and operational safety of the engine.
- All technical directives relevant for safety are especially emphasized. Pass
on safety instructions to other users, without fail.
- This engine must only be operated with accessories supplied, recommended
and released by BRP-Powertrain. Modifications are only allowed after
consent by the engine manufacturer.
■ CAUTION:
▲ WARNING: Engine and gear box are delivered in "dry" conditions (without
Effectivity: 912 Series
Edition 1 / Rev. 1
BRP-Powertrain
INSTALLATION MANUAL
Spare parts must meet with the requirements defined by the
engine manufacturer. This is only warranted by use of GENU-
INE ROTAX spare parts and/or accessories (see Illustrated
Parts Catalog).
They are available only at the authorized ROTAX Distribution-
and Service Centers.
The use of anything other than genuine ROTAX spare parts
and/or accessories will render any warranty relating to this
engine null and void (see Warranty Conditions).
oil). Before putting engine in operation it must be filled with oil.
Use only oil as specified (consult Operators Manual and SI-
912-016 "Selection of suitable operating fluids" current issue).
page 13
May 01/2009