Attachment Points - Rotax 912 i Series Installation Manual

Deviation
Graphic
Fig. 4
2.2)

Attachment points

See
General note
It is recommended that the 4 stated attachment points R2, L2, R3 and L3
of the engine suspension frame are used.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
INSTALLATION MANUAL
Fig. 5.
The hex. screws M10x60 in the attachment points are
NOTICE
WARNUNG
for transport only and must not be used for engine sus-
pension.
A minimum of 4 attachment points must be used.
NOTICE
WARNUNG
These must be distributed symmetrically between the
left (L) and right (R) sides.
10-10-00
Page 8
January 01/2012