1) Propeller drive
The propeller in tractor or pusher arrangement must be fitted on the pro-
General note
peller flange in accordance with applicable regulations. As required utilize
one of the three possible pitch circle diameters (P.C.D) on the flange.
The propeller design must be certified in accordance with applicable reg-
ulations, such as FAR or EASA, by the aircraft manufacturer.
1.1)
Technical data
See
Direction of rota-
tion
Direction of rotation of the propeller flange:
- left, counter clockwise, looking towards face of flange
Direction of rotation
Graphic
Fig. 1
Gear transmission:
Transmission
- i= 2.4286 (51 Teeth/21 T)
.
Effectivity: 912 i Series
Edition 1/Rev. 2
BRP-Powertrain
INSTALLATION MANUAL
Fig. 1
61-00-00
Page 3
January 01/2014