Technical Specifications For Programming, Reference Lists - Siemens SIMATIC ET 200S Operating Instructions Manual

2PULSE

5.6 Technical Specifications for Programming, Reference Lists

5.6 Technical Specifications for Programming, Reference Lists
Assignment of theControl interface
Address
Channel 0 Channel 1
Word 0 Word 4
Byte 2 Byte 6
Byte 3 Byte 7
Assignment of theFeedback interface
Address
Channel 0 Channel 1
Byte 0 Byte 4
314
Assignment
Depending on the mode
Pulse output: Pulse duration
•
Pulse-width modulation: Output value
•
Pulse train: Number of pulses
•
On/off-delay: Off-delay
•
Bit 7: Reserve = 0
Bit 6: Reserve = 0
Bit 5: Reserve = 0
Bit 4: Reserve = 0
Bit 3: Reserve = 0
Bit 2: SET_DO
Bit 1: MANUAL_DO
Bit 0: SW_ENABLE
Depending on the mode
Pulse output: On-delay factor
•
Pulse-width modulation: Period duration factor
•
Pulse train: Period duration factor
•
On/off-delay: On-delay factor
•
Assignment
Bit 7: ERR_24V
Bit 6: ERR_DO
Bit 5: ERR_PARA
Bit 4: ERR_PULS
Bit 3: ACK_SW_ENABLE
Bit 2: STS_ DI
Bit 1: STS_DO
Bit 0: STS_ENABLE
Technological Functions
Operating Instructions, 02/2007, A5E00124867-05