3.4
Terminal Assignment Diagram
Wiring Rules
The cables (terminals 1 and 8 and terminals 15 and 16) must be shielded. The shield must
be supported at both ends. To do this use the shield contact (see the
I/O System
Table 3-1
Terminal Assignment of the 1Count5V/500kHz
View
Technological Functions
Operating Instructions, 02/2007, A5E00124867-05
manual in the Appendix).
Terminal Assignment
1Count5V/500kHz
3.4 Terminal Assignment Diagram
ET 200S Distributed
Remarks
A, /A: Track A
B, /B: Track B
N, /N: Track N
24 VDC: Sensor supply
M: Chassis ground
DI: Digital input
DO1: Digital output
DO2: Digital output
123