Siemens SIMATIC ET 200S Operating Instructions Manual page 63

Possible Measuring Ranges with Error Indication
Function of the Digital Input
For the "Function DI" parameter, select one of the following functions for the digital input:
• Input
• HW gate
Function of the Digital Output DO1
For the "Function DO1" parameter, select one of the following functions for the DO1 digital
output:
• Output (no switching by the limit-value monitoring)
• Measured value outside the limits
• Measured value under the low limit
• Measured value over the high limit
Changing Values during Operation
The following values can be changed during operation:
• Low limit (LOAD_PREPARE)
• High limit (LOAD_VAL)
• Function of the Digital Output DO1 (C_DOPARAM)
• Integration time/update time (C_INTTIME)
See also
Gate Functions in Measurement Modes (Page 74)
Behavior of the Output in Measurement Modes (Page 75)
Assignment of the Feedback and Control Interfaces for the Measurement Modes (Page 77)
Technological Functions
Operating Instructions, 02/2007, A5E00124867-05
Frequency f
0.1 Hz
1 Hz
10 Hz
100 Hz
1 000 Hz
10 000 Hz
100 000 Hz
1Count24V/100kHz
2.7 Measurement Modes
Absolute error
±0.001 Hz
±0.001 Hz
±0.003 Hz
±0.02 Hz
±0.18 Hz
±1.8 Hz
±18 Hz
63