[Audio Settings] - Panasonic VariCam LT Operating Manual

[AUDIO SETTINGS]

Sets the audio recording function.
Item
[AUDIO RECORD]
[AUDIO INPUT] [INPUT 3 LINE/MIC SEL] Sets the audio input signal from the device connected to the <INPUT 3> terminal.
[INPUT 4 LINE/MIC SEL] Sets the audio input signal from the device connected to the <INPUT 4> terminal.
[INPUT 1/2 MIC
POWER]
[INPUT 1/2 MIC LEVEL]
[INPUT3 MIC POWER]
[INPUT4 MIC POWER]
[INPUT3 MIC LEVEL]
[INPUT4 MIC LEVEL]
[INPUT3/4 LINE LEVEL]
[CH1 IN SEL]
[CH2 IN SEL]
[CH3 IN SEL]
[CH4 IN SEL]
[CH1 MIC LOWCUT]
[CH2 MIC LOWCUT]
[CH3 MIC LOWCUT]
[CH4 MIC LOWCUT]
[TEST TONE]
[AUDIO LEVEL] [CH1 LEVEL]
Chapter 10 Menu Operations — Menu list
Sets if the recording and output of the audio of the camera is to be performed or not.
[ON], [OFF]
f Factory setting: [ON]
[LINE]: Sets this when an audio device is connected to the line input.
[MIC]: Sets this when connected to an external microphone.
f Factory setting: [LINE]
[LINE]: Sets this when an audio device is connected to the line input.
[MIC]: Sets this when connected to an external microphone.
f Factory setting: [LINE]
Switches the enable/disable of the phantom power supply of the external microphone connected to the
<INPUT 1/2> terminal.
[ON], [OFF]
f Factory setting: [OFF]
Sets the level of the external microphone connected to the <INPUT 1/2> terminal.
[−40dB]/[−50dB]/[−60dB]
f Factory setting: [−40dB]
Switches the enable/disable of the phantom power supply of the external microphone connected to the
<INPUT 3> terminal.
[ON], [OFF]
f Factory setting: [OFF]
Switches the enable/disable of the phantom power supply of the external microphone connected to the
<INPUT 4> terminal.
[ON], [OFF]
f Factory setting: [OFF]
Sets the level of the external microphone connected to the <INPUT 3> terminal.
[−40dB]/[−50dB]/[−60dB]
f Factory setting: [−60dB]
Sets the level of the external microphone connected to the <INPUT 4> terminal.
[−40dB]/[−50dB]/[−60dB]
f Factory setting: [−60dB]
Sets the line input level of the device connected to <INPUT 3> terminal and <INPUT 4> terminal.
[4dB]/[0dB]/[−3dB]
f Factory setting: [4dB]
Sets the input signal to be recorded to audio channel 1.
[INPUT1]/[INPUT3]
f Factory setting: [INPUT3]
Sets the input signal to be recorded to audio channel 2.
[INPUT2]/[INPUT4]
f Factory setting: [INPUT4]
Sets the input signal to be recorded to audio channel 3.
[INPUT1]/[INPUT3]
f Factory setting: [INPUT3]
Sets the input signal to be recorded to audio channel 4.
[INPUT2]/[INPUT4]
f Factory setting: [INPUT4]
Enables/disables the lowcut filter for audio channel 1.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the lowcut filter for audio channel 2.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the lowcut filter for audio channel 3.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the lowcut filter for audio channel 4.
[ON], [OFF]
f Factory setting: [OFF]
Sets if the test signal (tone signal with specification level 1 kHz) is output or not when the video is switched
to color bar.
The standard level varies depending on the setting of [HEADROOM].
[ON], [OFF]
f Factory setting: [ON]
Sets if the recording level adjustment method for audio channel 1 is to be automatic or manual.
[AUTO]: Adjust automatically.
[MANUAL]: Enables manual adjustment.
f Factory setting: [AUTO]
– 152 –
Description of settings