Panasonic VariCam LT Operating Manual page 145

Item
[800BASE ISO]
[5000BASE ISO]
[GAIN MODE]
[GAIN SELECT]
[GAIN OFFSET SW]
[GAIN OFFSET LEVEL]
[GAMMA] [GAMMA SELECT]
(page 73)
[MASTER GAMMA]
[R GAMMA]
[B GAMMA]
[BLACK GAMMA] [SW]
[BLACK R GAMMA]
[BLACK MASTER
GAMMA]
[BLACK B GAMMA]
Chapter 10 Menu Operations — Menu list
Sets the value when [800BASE] is selected.
[200ISO], [250ISO], [320ISO], [400ISO], [500ISO], [640ISO], [800ISO], [1000ISO], [1250ISO],
[1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO], [5000ISO], [6400ISO], [8000ISO], [10000ISO],
[12800ISO]
This will be [200ISO], [250ISO], [320ISO], [400ISO], [500ISO], [640ISO], [800ISO], [1000ISO], [1250ISO],
[1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO], [5000ISO], or [6400ISO] when [MAIN CODEC]
is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080 CROP]/[1920×1080
CROP].
f Factory setting: [800ISO]
Sets the value when [5000BASE] is selected.
[1250ISO], [1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO], [5000ISO], [6400ISO], [8000ISO],
[10000ISO], [12800ISO]
This will be [1250ISO], [1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO], [5000ISO], or [6400ISO]
when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080
CROP]/[1920×1080 CROP].
f Factory setting: [5000ISO]
Sets the operation when [dB] is selected.
[NORMAL], [HIGH]
f Factory setting: [NORMAL]
Sets the value when [dB] is selected.
[−12dB], [−10dB], [−8dB], [−6dB], [−4dB], [−2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB],
[14dB]
This will be [−8dB], [−6dB], [−4dB], [−2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], or [14dB] when
[MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080 CROP]/
[1920×1080 CROP].
When [GAMMA] → [GAMMA SELECT] is set to [VIDEO45]/[VIDEO50]/[BC GAMMA]
This will be set to [−6dB], [−4dB], [−2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], [14dB], [16dB],
[18dB], or [20dB].
Also, this will be [−6dB], [−4dB], [−2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], [14dB] when
[MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT] and [MAIN PIXEL] is set to [2048×1080 CROP]/
[1920×1080 CROP].
f Factory setting: [0dB]
Sets whether to perform fine adjustment of control when [dB] is selected.
[ON], [OFF]
f Factory setting: [OFF]
Sets the fine adjustment level.
[0.0dB] - [0.9dB] (0.1 dB step)
f Factory setting: [0.0dB]
Selects the gamma mode.
[V-Log] and [BC GAMMA] can be selected only when [MAIN] is set to [SHADING].
[V-Log]: This is the gamma curve that can achieve tone and wide latitude.
[V-709]: This is a gamma curve equivalent to Varicam standard CINE-LIKE. A tone optimum for preview on
the monitor can be achieved.
[V-406060]: A VARICAM-LOOK gamma curve with a latitude of 14+Stop. This is a setting focused on
contrast.
[V-452080]/[V-452080L]: This is a VARICAM-LOOK gamma curve with a latitude of 14+Stop. This is a
setting focused on soft texture.
[VIDEO45]: A BC-LOOK gamma curve with 600% dynamic range.
[VIDEO50]: A BC-LOOK gamma curve with 600% dynamic range. This is a setting focused on contrast.
[BC GAMMA]: A gamma curve with 600% dynamic range. The gamma factor can be adjusted in the range
of [0.150] to [0.750].
f Factory setting: [V-709]
Adjusts the gamma characteristic.
[0.150] - [0.750]
f Factory setting: [0.450]
Adjusts the gamma characteristic of red against the master gamma.
[−75] - [+75]
f Factory setting: [0]
Adjusts the gamma characteristic of blue against the master gamma.
[−75] - [+75]
f Factory setting: [0]
Enables/disables the black gamma.
[ON], [OFF]
f Factory setting: [OFF]
Adjusts the gamma characteristic of red around black against the master gamma.
Can be controlled only when [GAMMA SELECT] is set to [BC GAMMA].
[−20] - [+20]
f Factory setting: [0]
Adjusts the gamma characteristic around black.
[−48] - [+48]
f Factory setting: [0]
Adjusts the gamma characteristic of blue around black against the master gamma.
[−20] - [+20]
f Factory setting: [0]
– 145 –
Description of settings