[Camera Settings] - Panasonic VariCam LT Operating Manual

[CAMERA SETTINGS]

Sets the basic camera function.
[WHITE]/[BLACK]/[EI] is enabled only when [MENU] → [SYSTEM SETTINGS] → [COLOR SETTINGS] → [MAIN] is set to [V-Log].
Item
[FPS] [VFR SW]
[VALUE]
[ADD]
[DELETE]
[WHITE] [AWB]
[VALUE]
[ADD]
[DELETE]
[BLACK] [ABB]
[NR] [ISO800]
[ISO5000]
[EI] [MODE]
[ISO SELECT]
[NATIVE ISO]
[800BASE ISO]
[5000BASE ISO]
[GAIN MODE]
Chapter 10 Menu Operations — Menu list
Enables/disables the variable frame rate function.
[ON]: Enables the variable frame rate function. The arbitrary frame rate can be set in [VALUE]. Audio
cannot be recorded.
[OFF]: Disables the variable frame rate function.
f Factory setting: [OFF]
Selects from a maximum of 150 registered values.
f Factory setting: [23.98fps]
Newly registers to the list. The value newly registered can be selected with [VALUE].
It will replace the currently selected value when there are 150 registered already.
Deletes from the list. Deletion is not possible when there is only one registered value.
[YES], [NO]
Executes automatic white balance.
[EXECUTE], [CANCEL]
Selects a value from a maximum of 12 registered values.
Preset values that can be selected in the factory settings are [3200K+0.0GMg], [4300K+0.0GMg],
[5600K+0.0GMg], and [6300K+0.0GMg].
f Factory setting: [3200K+0.0GMg]
Newly registers to the list. The value newly registered can be selected with [VALUE].
It will replace the currently selected value when there are 12 registered already.
Deletes from the list. Deletion is not possible when there is only one registered value.
[YES], [NO]
Executes automatic black balance. When executing automatic black balance, put the cap on the lens to
keep any light from entering the image sensor.
[EXECUTE], [CANCEL]
Switches the noise reduction effect in the range of ISO200 to ISO4000.
[ON], [OFF]
This will be in the range between ISO200 and ISO2000 when [MAIN CODEC] is set to [AVC-Intra2K-LT]/
[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080 CROP]/[1920×1080 CROP].
The range is within [NORMAL] in the [GAIN MODE] setting when the [MODE] setting in [EI] is set to [dB].
f Factory setting: [OFF]
Switches the noise reduction effect in the range of ISO1250 to ISO12800.
[ON], [OFF]
This will be in the range between ISO2500 and ISO6400 when [MAIN CODEC] is set to [AVC-Intra2K-LT]/
[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080 CROP]/[1920×1080 CROP].
The range is within [HIGH] in the [GAIN MODE] setting when the [MODE] setting in [EI] is set to [dB].
f Factory setting: [OFF]
Switches the EXPOSURE INDEX control unit.
[ISO], [dB]
f Factory setting: [ISO]
Selects the operation of ISO.
[NATIVE ONLY], [800BASE], [5000BASE]
f Factory setting: [NATIVE ONLY]
Sets the value when [NATIVE ONLY] is selected.
[800ISO], [5000ISO]
This will be [400ISO] or [2500ISO] when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and
[MAIN PIXEL] is set to [2048×1080 CROP]/[1920×1080 CROP].
f Factory setting: [800ISO]
Sets the value when [800BASE] is selected.
[200ISO], [250ISO], [320ISO], [400ISO], [500ISO], [640ISO], [800ISO], [1000ISO], [1250ISO],
[1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO]
This will be [200ISO], [250ISO], [320ISO], [400ISO], [500ISO], [640ISO], [800ISO], [1000ISO], [1250ISO],
[1600ISO], or [2000ISO] when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN
PIXEL] is set to [2048×1080 CROP]/[1920×1080 CROP].
f Factory setting: [800ISO]
Sets the value when [5000BASE] is selected.
[1250ISO], [1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO], [5000ISO], [6400ISO], [8000ISO],
[10000ISO], [12800ISO]
This will be [1250ISO], [1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO], [5000ISO], or [6400ISO]
when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080
CROP]/[1920×1080 CROP].
f Factory setting: [5000ISO]
Sets the operation when [dB] is selected.
[NORMAL], [HIGH]
f Factory setting: [NORMAL]
– 142 –
Description of settings