Panasonic VariCam LT Operating Manual page 92

[SYSTEM]
[WB]
Chapter 5 Operation — HOME screen
[NORMAL]
[HIGH]
Sets the camera's system.
[DAILIES]
[CAM INDEX & REEL CNT]
[SYSTEM MODE]
f [FREQUENCY]
f [SDI RAW]
f [MAIN PIXEL]
f [MAIN CODEC]
f [PROXY CODEC]
[AUDIO]
[HIGH SPEED]
[SYSTEM MODE PRESET]
Sets the color temperature (white balance).
Selects from the predefined white balance value.
Up to 12 can be registered.
Presets can be added/deleted using [ADD]/[DELETE].
[AWB]
Sets [GAIN MODE] to [NORMAL]. (When [dB] is set)
Sets [GAIN MODE] to [HIGH]. (When [dB] is set)
Sets the data to superimpose on the video to be recorded in the sub recorder.
[WATER MARK]: Superimposes the set character string.
[FRAME MARK]: Superimposes the frame mark.
[WINDOW BURN]: Sets [WINDOW BURN].
[PREVIEW]: Confirms the setting condition while displaying the current camera
video.
Sets [CAM INDEX] and [NEXT REEL CNT].
[CAM INDEX]: Sets [CAM INDEX].
[NEXT REEL CNT]: Sets [NEXT REEL CNT].
Sets the system frequency.
The basic system of the camera is determined by five settings of
[FREQUENCY]/[SDI RAW]/[MAIN PIXEL]/[MAIN CODEC]/[HIGH SPEED].
Restarting the system is necessary if basic system setting is changed.
Dialog prompting for restart is displayed in the center of the screen when one of
the 5 settings is changed. Restart by operating the power switch of the camera,
or by pressing the jog dial button and following the on-screen instruction.
Sets the RAW output format from the <SDI OUT 1>/<SDI OUT 2> terminal.
Sets the camera's main resolution (number of pixels).
Sets the main recorder's codec.
[PROXY CODEC]: Sets the proxy codec to be recorded in the main recorder
and the sub recorder.
[VFR SUB REC]: Selects either [NORMAL+Audio] or [VFR up to 60p (50p)].
f [NORMAL+Audio]: Records in the frame of system frequency. Audio signal is
also recorded.
This cannot be selected when [PROXY SLOT] is set to [MAIN & SUB] or
[MAIN].
This cannot be selected when [MAIN CODEC] is set to [AVC-Intra100] and
[VFR] is set to [ON].
f [VFR up to 60p (50p)]: Records in a variable frame rate by synchronizing to
the [VFR] setting of the main recorder. Audio signal is not recorded when
[VFR] is set to [ON].
This cannot be selected when [MAIN PIXEL] is set to [2048×1080 CROP] or
[1920×1080 CROP].
[PROXY SLOT]: Sets the slot to record the proxy video.
f [MAIN & SUB]: Records to both the main recorder and the sub recorder.
f [MAIN]: Records only to the main recorder.
f [SUB]: Records only to the sub recorder.
Sets the audio input and recording.
[AUDIO VOL]: Sets the input volume.
[AUDIO IN]: Sets input channel switching and level control.
[AUDIO OUT]: Sets the output to a speaker or headphone.
Sets the frame rate when [SDI RAW] is set to [2K/10bit] or [HD/10bit], and
[MAIN CODEC] is set to [OFF].
[ON], [OFF]
f Factory setting: [OFF]
Selects from the preset system mode. Up to five can be registered.
The screen will transfer to the [SYSTEM MODE PRESET] screen by placing
the cursor on [SYSTEM MODE] in the [SYSTEM] screen and pressing the jog
dial button.
f [LOAD]
Changes the each item in [SYSTEM MODE] to the setting of the selected
system mode.
The setting menus other than [SYSTEM MODE] may also be changed linked
to the selected system menu.
f [DELETE]
Deletes the selected system mode.
f [SAVE]
Registers the setting value currently in the camera. Replaces with the
currently selected value when there are 5 values already registered.
The setting values for each item in [SYSTEM MODE] and the setting value for
[VFR] are registered.
Executes automatic white balance.
The execution results are automatically registered as one list of 12 items.
– 92 –