Mounting The Electronic Hd Color View Finder - Panasonic VariCam LT Operating Manual

Mounting the electronic HD color view finder

1
Attach the slider unit to the viewfinder mounting holes on top of the camera using the two supplied screws. (Fig. 1)
2
Slide the viewfinder plate from above into the slider unit. (Fig. 2)
Release the viewfinder lock lever by pushing it forward.
3
Push down the lock lever backwards to lock.
4
Connect the BNC cable supplied with the viewfinder to the video signal input terminal of the viewfinder and the <VF SDI> terminal
of the camera.
5
Connect the DC cable supplied with the viewfinder to the power supply input terminal of the viewfinder and the <DC OUT>
terminal of the camera.
Disassembling
a: Stopper
b: Lock lever
1
Remove the connecting cable.
2
Push down the lock lever towards the front to release the lock.
3
Lift the viewfinder while pulling the stopper.
4
Remove the slider unit clamping screw.
Chapter 3 Preparation — Mounting the module
Fig. 1
b
a
– 21 –
Lock
Release
Fig. 2