Panasonic VariCam LT Operating Manual page 155

Item
[VF SDI OUT] [VF SDI OUT FORMAT]
[3G-SDI OUT]
[VF SDI CLEAN VIEW]
[SURROUND VIEW SW] Selects enable/disable of the surround view function (a function to display the video outside the valid area
[SURROUND VIEW
AREA]
[SURROUND VIEW
LINE SW]
[SURROUND VIEW
COLOR]
[SURROUND VIEW
LEVEL]
[SDI OUT INDICATOR] [SDI OUT 1 SW]
[SDI OUT 2 SW]
[SYSTEM PIXEL]
[REC FORMAT]
[REC MODE]
[VFR]
[FPS]
[SHUTTER]
Chapter 10 Menu Operations — Menu list
Selects the signal to be output from the <VF SDI> terminal.
It is output in the HD (1920×1080) format regardless of the [MAIN PIXEL] setting.
The items that can be set differ depending on the settings of [FREQUENCY] and [MAIN CODEC].
When [MAIN CODEC] is set to [AVC-Intra2K 444] or [AVC-Intra444]
When [FREQUENCY] is set to [23.98p]: [23.98PsF]
When [FREQUENCY] is set to [24.00p]: [24.00PsF]
When [FREQUENCY] is set to [25.00p]: [25.00PsF]
When [FREQUENCY] is set to [29.97p]: [29.97PsF]
When [MAIN CODEC] is set to anything other than above
When [FREQUENCY] is set to [23.98p]: [23.98PsF]/[59.94p]/[59.94i]
When [FREQUENCY] is set to [24.00p]: [24.00PsF]/[60.00p]/[60.00i]
When [FREQUENCY] is set to [25.00p]: [25.00PsF]/[50.00p]/[50.00i]
When [FREQUENCY] is set to [29.97p]: [29.97PsF]/[59.94p]/[59.94i]
When [FREQUENCY] is set to [50.00p]: [50.00p]/[50.00i]
When [FREQUENCY] is set to [59.94p]: [59.94p]/[59.94i]
When [FREQUENCY] is set to [50.00i]: [50.00i]
When [FREQUENCY] is set to [59.94i]: [59.94i]
f Factory setting: [59.94p]
Sets the format of the 3G SDI signal output from the <VF SDI> terminal.
[LEVEL-A]: Selects the LEVEL-A method.
[LEVEL-B]: Selects the LEVEL-B DL method.
f Factory setting: [LEVEL-B]
Sets if the output from the <VF SDI> terminal will be video only or to superimpose the signal for marker or
indicator.
[ON]: Outputs video only.
[OFF]: Outputs the signals for video and marker or indicator.
f Factory setting: [OFF]
to the viewfinder).
[ON], [OFF]
f Factory setting: [OFF]
Selects the area for the surround view.
[UPPER (NORMAL)], [LOWER]
The recorded video will shift approximately 396 µm upward from the center of the lens when [LOWER] is
selected. Take caution when using a zoom lens.
f Factory setting: [UPPER (NORMAL)]
Selects enable/disable of the line mark display function for valid area.
[ON], [OFF]
f Factory setting: [ON]
Selects the color of the line mark for valid area.
[WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]
f Factory setting: [WHITE]
Sets the mask level against the surround signal.
[OFF], [75%], [50%], [25%]
f Factory setting: [OFF]
Switches display/hide of the item to set with [SDI OUT INDICATOR] to the output from the <SDI OUT 1>
terminal.
[ON]: Items are individually displayed/hidden.
[OFF]: Hides all.
f Factory setting: [ON]
Switches display/hide of the item to set with [SDI OUT INDICATOR] to the output from the <SDI OUT 2>
terminal.
[ON]: Items are individually displayed/hidden.
[OFF]: Hides all.
f Factory setting: [ON]
Switches display/hide of the system pixels.
[ON], [OFF]
f Factory setting: [ON]
Switches display/hide of the recording format display.
[ON], [OFF]
f Factory setting: [ON]
Switches display/hide of the status for the interval recording or the pre-recording.
[ON], [OFF]
f Factory setting: [ON]
Switches display/hide of the variable frame rate status.
[ON], [OFF]
f Factory setting: [ON]
Switches display/hide of the frame rate.
[ON], [OFF]
f Factory setting: [ON]
Switches display/hide of the shutter speed.
[ON], [OFF]
f Factory setting: [ON]
– 155 –
Description of settings