False Color Mode - Panasonic VariCam LT Operating Manual

False color mode

Check the exposure using the false color.
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [FALSE COLOR SW] to [ON].
Image will be displayed with colors sored by luminosity signals. Images of other levels are displayed in black and white.
The false color can be displayed through output from the <VF SDI> terminal.
Display patterns
r When [MAIN COLOR] is [V-Log]
Color
(Red)
(Yellow)
(Pink)
(Green)
(Blue)
(Purple)
* The white clip level will differ according to the [EI] and [MAIN CODEC] settings.
r When [MAIN COLOR] is not [V-Log]
Color
(Red)
(Yellow)
(Blue)
(Purple)
* The white clip level will differ according to the [EI] and [MAIN CODEC] settings.
Chapter 7 Viewfinder — Convenient shooting functions
Level
(White clip −3%) or more*
(White clip −6%) to (White clip −3%)*
48.7% - 51.8%
40.5% - 43.6%
10.3% - 13.2%
7.3% - 10.3%
Level
(White clip −1%) or more*
98% - 100%
2.5% - 4.0%
0% - 2.5%
– 114 –
Description
White-level clip
Lower area of the white-level clip
One-stopover color from neutral gray
18% gray neutral color
Upper area of the black-level clip
Black-level clip
Description
White-level clip
100% level of video output
Upper area of the black-level clip
Black-level clip