Mounting the grip module
Grip arm
<LENS/GRIP> terminal
1
Attach the grip arm to the grip. (Fig. 1)
2
Attach the grip arm to the accessory attachment (rosette) on the shoulder mount module. (Fig. 2)
3
Connect the cable to the <LENS/GRIP> terminal. (Fig. 3)
4
Adjust the length of the grip arm. (Fig. 4)
Adjust the angle of the grip as necessary.
Chapter 3 Preparation — Mounting the module
Grip
Fig. 1
Fig. 3
– 23 –
Fig. 2
Fig. 4