Assigning Functions To The User Buttons; Selectable Functions - Panasonic VariCam LT Operating Manual

Assigning functions to the USER buttons

Selected function can be assigned to the USER buttons (<USER 1> to <USER 3>, <TOGGLE/WB> (USER4), <USER GRIP1> to <USER GRIP2>) and
the control panel operation buttons (USER5 to USER10).
Set the function to assign to each with [USER1] to [USER3]/[USER TOGGLE(USER4)]/[USER5] to [USER10]/[USER GRIP1] to [USER GRIP2] in
[MENU] → [SYSTEM SETTINGS] → [USER SWITCHES].
There are no functions assigned to the USER button in the factory settings.
<USER 1>
<USER 2>
<USER 3>
<TOGGLE/WB> (USER4)

Selectable functions

Item
[INHIBIT] Disables assignment of functions.
[SIX USER
Sets against the <USER 1> to <USER 3> buttons, when the control panel operation button is used as the USER button.
BUTTONS]
[AWB] Assigns the automatic white balance function.
Assigns the function for displaying the luminance level of the image at the position indicated by the square marker displayed near the
[Y GET]
center.
[EXPAND1] Assigns the enlargement function 1.
[EXPAND2] Assigns the enlargement function 2.
[OPEN IRIS F.A.] Assigns the open iris focus assist function.
[IN COLOR F.A.] Assigns the focus in color function.
[SQ. F.A.] Assigns the focus square function.
[MONO F.A.] Assigns the monochrome display function.
[WFM] Enables/disables the viewfinder wave form display.
[BARS] Assigns the color bars display function.
[ONE PUSH A. IRIS] Executes the one-push auto iris.
[FALSE COLOR] Enables/disables the false color mode.
[ZEBRA] Superimposes the zebra signal to the output from the <VF SDI> terminal.
[VF SDI COLOR] Switches output images from the <VF SDI> terminal.
[SDI OUT 1 COLOR] Switches the output image from the <SDI OUT 1> terminal.
[SDI OUT 2 COLOR] Switches the output image from the <SDI OUT 2> terminal.
[VF SDI CLEAN] Sets so only video is output from the <VF SDI> terminal.
[VF SDI MARKER] Sets so video and marker signal are output from the <VF SDI> terminal.
[VF SDI
Switches ON/OFF of the de-squeeze function against the output from the <VF SDI> terminal.
DESQUEEZE]
[VF SDI IMAGE
Switches ON/OFF of the invert display function against the output from the <VF SDI> terminal.
INVERT]
[SMOOTH MODE] Assigns the smooth mode function.
[TEXT MEMO] Assigns the text memo function.
[SHOT MARK] Assigns the shot mark function.
[REC SW] Assigns the function of the <REC> button.
[AUDIO MON VOL] Calls the screen to adjust the audio monitor output to the control panel.
[AUDIO IN VOL] Calls the screen to adjust the audio input to the control panel.
Chapter 9 Other Useful Functions — Assigning functions to the USER buttons
<USER GRIP1>
<USER GRIP2>
Description
– 121 –
USER6
USER5 USER7
USER8 USER10
USER9