Menu List; [System Settings] - Panasonic VariCam LT Operating Manual

Menu list

[SYSTEM SETTINGS]

Sets the system in general.
Item
[SYSTEM MODE] [FREQUENCY]
[SDI RAW]
[MAIN PIXEL]
[MAIN CODEC]
[PROXY CODEC]
[PROXY SLOT]
[VFR PROXY REC]
[HIGH SPEED]
[COLOR SETTINGS] [MAIN]
[GRADING]
[PROXY]
Chapter 10 Menu Operations — Menu list
Sets the system frequency.
The basic system of the camera is determined by five settings of [FREQUENCY]/[SDI RAW]/[MAIN
PIXEL]/[MAIN CODEC]/[HIGH SPEED]. Restarting the system is necessary if basic system setting is
changed. Dialog prompting for restart is displayed when one of the 5 settings is changed. Restart by
operating the power switch of the camera, or by pressing the jog dial button and following the on-screen
instruction.
[23.98p], [24.00p], [25.00p], [29.97p], [50.00p], [59.94p], [50.00i], [59.94i]
f Factory setting: [23.98p]
Sets the number of RAW pixels and the bit depth of the output from the <SDI OUT 1>/<SDI OUT 2>
terminal.
[OFF], [4K/10bit], [4K/12bit], [2K/10bit], [UHD/10bit], [UHD/12bit], [HD/10bit]
f Factory setting: [OFF]
Sets the main recorder's number of recording pixels.
Selectable items vary depending on the [SDI RAW] setting.
[4096×2160], [3840×2160], [2048×1080], [2048×1080 CROP], [1920×1080], [1920×1080 CROP]
f Factory setting: [4096×2160]
Selectable items vary when [SDI RAW] is set as follows.
f [2048×1080 CROP]/[1920×1080 CROP] cannot be selected when it is set to [OFF].
f Only [2048×1080] can be selected when it is set to [4K/12bit].
f Only [1920×1080] can be selected when it is set to [UHD/12bit].
Sets the recording codec of the main recorder. Selectable items vary depending on the [FREQUENCY]/
[SDI RAW]/[MAIN PIXEL] setting.
[AVC-Intra4K 422], [AVC-Intra4K-LT], [AVC-Intra2K 444], [AVC-Intra2K 422], [AVC-Intra2K-LT],
[AVC-Intra444], [AVC-Intra422], [AVC-Intra-LT], [AVC-Intra100], [AVC-LongG50], [AVC-LongG25],
[ProRes 4444 XQ], [ProRes 4444], [ProRes 422 HQ], [ProRes 422], [ProRes 422 LT], [OFF]
[OFF] can be set when [SDI RAW] is set to anything other than [OFF].
f Factory setting: [AVC-Intra4K 422]
Sets the codec of the proxy recording.
At the same time, it switches enable/disable of the proxy data recording.
[AVC-Proxy G6], [OFF]
f Factory setting: [OFF]
Sets the slot to record the proxy.
[MAIN & SUB], [MAIN], [SUB]
[NORMAL+Audio] cannot be recorded when the variable frame rate function is enabled with [MAIN &
SUB], [MAIN].
The proxy recorded in the SD memory card cannot be transferred via network.
f Factory setting: [MAIN & SUB]
Sets the operation of the sub recorder during the variable frame rate operation.
[VFR up to 60p (50p)], [NORMAL+Audio]
f Factory setting: [VFR up to 60p]
Sets the frame rate when [SDI RAW] is set to [2K/10bit] or [HD/10bit], and [MAIN CODEC] is set to [OFF].
[OFF], [ON]
f Factory setting: [OFF]
Sets the colors of videos (entire camera system) recorded in the main recorder.
[V-Log]/[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]/[SHADING]
f Factory setting: [V-Log]
Sets whether to apply the grading process.
This only enabled when [V-Log] is set in [MAIN].
[Internal]: Sets grading with the control panel.
[OFF]: Disables the grading process.
[External App]: Sets the grading using an external application.
[SHADING]: Sets the shading assuming the use of external ROP.
f Factory setting: [OFF]
Sets the color of video recorded as proxy.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [SHADING]
[BAKED IN]/[V-Log]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
When [MAIN] is set to [SHADING]
[BAKED IN]
f Factory setting: [V-Log]
– 135 –
Description of settings