Dding New Sound On A Recorded Cassette; (Audio Dubbing) - Panasonic NV-DS99EN Operating Instructions Manual

iwm&m)
• £QH!i§[CAMERA FUNCTIONS]±^mJl[OTHER FUNCTIONS]^
¥*tt[i2bit](i2bit #£)5ttM&[i6bit]i$ - giifTWJgftf
m - •
<if&s«sis*iftMB# • m
[AUDIOREC](M}f^)iIsgSS[12bit] o )
•mm • (-►15)
1 JSABffiisiKffi
•m
[power] gfluagsM^
wcmmxm)
•
n«s^^±mai7iMe»i^[REC](is^)»
ffitstiejMi •
ttlJitbJS •
3 8Hn»±M[A.DUB](MM)IB-
4 [i i] ffi > it •
ENGLISH
Adding New Sound on a Recorded
Cassette
(Audio Dubbing)
To perform audio dubbing, the Remote Controller is
necessary.
You can add music or narration on a recorded cassette.
• If [AUDIO REC] on the [OTHER FUNCTIONS] Sub-Menu of
the [CAMERA FUNCTIONS] Main-Menu has been set to
[1 Gbit], performing audio dubbing erases the previously
recorded sound. (If you intend to perform audio dubbing but
also want to keep the original sound, be sure to set [AUDIO
REC] to [12bit] before making the original recording.)
•It is not possible to perform audio dubbing onto recordings
made in the LP Mode. (-♦ 15)
1 Insert the recorded cassette and set the
[POWER] Switch to [VCR].
Make sure that the prevention slider of the cassette is set
to [REC],
2
At the point from which you want to insert the
new sound, switch the Movie Camera over to
the Still Playback Mode.
Using Cue Playback, Review Playback or Variable Speed
Playback makes it easy to search for this point.
3
Press the [A.OUB] Button on the Remote
Controller.
4
Press the Pause Button [I I] on the Remote
Controller to start audio dubbing.
Stopping Audio Dubbing
Press the Pause Button [II] on the Remote Controller.
The Movie Camera is again in the Still Playback Mode.