Panasonic VariCam LT Operating Manual page 137

Item
[SLOPE-B]
[OFFSET-R]
[OFFSET-G]
[OFFSET-B]
[POWER-R]
[POWER-G]
[POWER-B]
[SATURATION]
[R GAIN]
[G GAIN]
[B GAIN]
[M.PED]
[R PED]
[G PED]
[B PED]
[MASTER GAMMA]
[R GAMMA]
[B GAMMA]
[CHROMA LEVEL]
[ANAMORPHIC [PROXY & SDI OUT]
DESQUEEZE]
[VF SDI]
[DESQUEEZE RATIO]
Chapter 10 Menu Operations — Menu list
Sets the value of [SLOPE-B].
[0.50] - [2.00] (0.01 step)
f Factory setting: [1.00]
Sets the value of [OFFSET-R].
[−0.50] - [0.50] (0.01 step)
f Factory setting: [0.00]
Sets the value of [OFFSET-G].
[−0.50] - [0.50] (0.01 step)
f Factory setting: [0.00]
Sets the value of [OFFSET-B].
[−0.50] - [0.50] (0.01 step)
f Factory setting: [0.00]
Sets the value of [POWER-R].
[0.50] - [2.00] (0.01 step)
f Factory setting: [1.00]
Sets the value of [POWER-G].
[0.50] - [2.00] (0.01 step)
f Factory setting: [1.00]
Sets the value of [POWER-B].
[0.50] - [2.00] (0.01 step)
f Factory setting: [1.00]
Sets the value of [SATURATION].
[0.00] - [2.00] (0.01 step)
f Factory setting: [1.00]
Adjusts the gain of Rch when [GRADING] is set to [SHADING].
[−200] - [+200] (1 step)
f Factory setting: [0]
Adjusts the gain of Gch when [GRADING] is set to [SHADING].
[−200] - [+200] (1 step)
f Factory setting: [0]
Adjusts the gain of Bch when [GRADING] is set to [SHADING].
[−200] - [+200] (1 step)
f Factory setting: [0]
Adjusts the level of the master pedestal when [GRADING] is set to [SHADING].
[−100] - [+100] (1 step)
f Factory setting: [0]
Adjusts the pedestal level of Rch when [GRADING] is set to [SHADING].
[−100] - [+100] (1 step)
f Factory setting: [0]
Adjusts the pedestal level of Gch when [GRADING] is set to [SHADING].
[−100] - [+100] (1 step)
f Factory setting: [0]
Adjusts the pedestal level of Bch when [GRADING] is set to [SHADING].
[−100] - [+100] (1 step)
f Factory setting: [0]
Adjusts the gamma characteristic when [GRADING] is set to [SHADING].
[−50] - [+50] (1 step)
f Factory setting: [0]
Adjusts the gamma characteristic of the red against the master gamma when [GRADING] is set to
[SHADING].
[−15] - [+15] (1 step)
f Factory setting: [0]
Adjusts the gamma characteristic of the blue against the master gamma when [GRADING] is set to
[SHADING].
[−15] - [+15] (1 step)
f Factory setting: [0]
Adjust the chroma level of the P
R
[−99%] - [99%]
f Factory setting: [0%]
Sets if the video to be recorded in the proxy and the SDI output video is to be de-squeezed.
[ON], [OFF]
f Factory setting: [OFF]
Sets if the output video from the <VF SDI> terminal is to be de-squeezed.
[ON], [OFF]
f Factory setting: [OFF]
Sets the de-squeeze ratio.
[1.3x]: De-squeeze 1.3 times in horizontal direction.
[1.3xmag]: It will be in aspect ratio of 2.39:1 for mastering generated from the image de-squeezed 1.3
times in horizontal direction.
[2.0x]: De-squeeze 2.0 times in horizontal direction.
[2.0xmag]: It will be in aspect ratio of 2.39:1 for mastering generated from the image de-squeezed 2.0
times in horizontal direction.
f Factory setting: [1.3x]
– 137 –
Description of settings
signal and the P signal when [GRADING] is set to [SHADING].
B