[White Clip]; [Detail]; [Skin Detail] - Panasonic VariCam LT Operating Manual

[WHITE CLIP]

This function sets the brightest part of video signals to be not brighter than a certain level.
1
Select [ON] in [MENU] → [SCENE FILE SETTINGS] → [WHITE CLIP] → [SW].
2
Set the level with [LEVEL].

[DETAIL]

This function thickens or weakens the outlines of images.
It can have soft representation or sharp representation, but it can also have an effect to roughen the entire video by enhancing the noise or edge.
To avoid such problems, it is necessary not to add this effect on parts where emphasizing is not needed and keep the details of the parts.
[MENU] → [SCENE FILE SETTINGS] → [DETAIL] is disabled when [MAIN CODEC] is set to [AVC-Intra4K-LT]/[AVC-Intra2K-LT]/[AVC-Intra-LT].
1
Select [ON] in [MENU] → [SCENE FILE SETTINGS] → [DETAIL] → [SW], or in [MENU] → [SYSTEM SETTINGS] → [COLOR
SETTINGS] → [DETAIL SW].
2
Set the level in [CORING]/[MASTER LEVEL]/[FREQUENCY] or [DETAIL CORING]/[DETAIL LEVEL].
f [CORING]/[DETAIL CORING]:
Sets the level of signal (including noise) that does not activate the detail effect.
f [MASTER LEVEL]/[DETAIL LEVEL]:
Sets the level of the detail effect of the whole part.
f [FREQUENCY]:
Sets the thickness of the detail entirely.

[SKIN DETAIL]

This function makes human skin look smoother in images.
[MENU] → [SCENE FILE SETTINGS] → [SKIN DETAIL] is disabled when [MAIN CODEC] is set to [AVC-Intra4K-LT]/[AVC-Intra2K-LT]/[AVC-Intra-LT].
1
Select [ON] in [MENU] → [SCENE FILE SETTINGS] → [SKIN DETAIL] → [SW].
2
Set with [TABLE SELECT]/[ZEBRA SW]/[DETECT TABLE]/[GET]/[EFECT LEVEL].
f [TABLE SELECT]:
Selects from the 3 table data of [A], [B], or [C] to determine which skin tone to operate the skin tone detail function.
[A], [B], and [C] can be set individually or in combination.
f [ZEBRA SW]:
Sets whether to superimpose the zebra signal to the color by which the skin tone detail is applied.
f [DETECT TABLE]:
Selects the table to set from the 3 table data of [A], [B], or [C].
f [GET]:
Obtains the color information of [A], [B], or [C] selected in [DETECT TABLE] from near the center marker.
Data for [- I CENTER] to [- Q PHASE] is automatically acquired when executed.
f [EFECT LEVEL]:
Sets the effect level of the skin tone detail for [A], [B], or [C] selected in [DETECT TABLE].
Chapter 4 Video Recording and Color Grading — Image quality adjustment
White clip level
Output
0
Input
– 75 –