Panasonic VariCam LT Operating Manual page 125

2
Enter the text to set with the keyboard.
3
Select [OK] with the jog dial button and press the jog dial button.
The confirmation screen is displayed.
4
Select [YES] and press the jog dial button.
Saving of the file is started.
5
When the completion message is displayed, select [OK], and press the jog dial button.
When an error message is displayed, refer to "Cases indicated by error messages" (page 202).
@ NOTE
t The setup file saved by this camera cannot be used in other cameras.
t The setup file saved by other cameras cannot be used in this camera.
t The setup file and scene file can be operated even if the card slot cover is opened.
t The setup file and scene file can be operated even if the [REC IMPOSSIBLE] error is displayed.
To load the setup data written in the SD memory card
1
Select [LOAD(SD CARD)] in [MENU] → [FILE] → [SETUP FILE], and press the jog dial button.
The list of setup files stored in the specified folder in the SD memory card is displayed.
2
Select the file name to load, and press the jog dial button.
The confirmation screen is displayed.
The camera will restart after loading is completed if [SYSTEM RESTART] is displayed in the confirmation screen.
3
Select [YES] and press the jog dial button.
Loading of the file is started.
When an error message is displayed, refer to "Cases indicated by error messages" (page 202).
Chapter 9 Other Useful Functions — Handling setting data
– 125 –