Setting Menu Display; Setting Menu Basic Operations; Setting Menu Initialization - Panasonic VariCam LT Operating Manual

Setting menu display

Setting menu basic operations

You can change camera settings using the setting menu according to the shooting scene and recording details.
Set data are written and saved in the internal memory of the camera.
Operate with the control panel. It can also be operated with the buttons on the camera unit when the control panel is not installed.
a: <MENU> button
b: <EXIT> button
c: Jog dial button/<IRIS/SEL> dial button
1
Press the <MENU> button when not recording.
f The [MENU] screen is displayed on the control panel.
f The [MENU] screen is also displayed in the viewfinder connected to the <VF SDI> terminal when the <MENU> button on the camera is pressed.
2
Turn the jog dial button (<IRIS/SEL>) and align the cursor to the corresponding menu item.
f The cursor will move up or down when the jog dial button (<IRIS/SEL> dial button) is turned.
3
Press the jog dial button (<IRIS/SEL> dial button).
f The next level of screen is displayed.
If there is another level, press the jog dial button again to display it.
f The current setting value of the item selected on the right is displayed.
4
Turn the jog dial button (<IRIS/SEL>) and align the cursor to the corresponding item.
5
Press the jog dial button (<IRIS/SEL> dial button).
The item is in the setting status.
If there are two items, the setting value selection frame may be displayed on the right.
6
Turn the jog dial button (<IRIS/SEL>) and align the cursor to the corresponding item.
7
Press the jog dial button (<IRIS/SEL> dial button).
Setting is completed.
8
Press the <EXIT> button to close the menu.

Setting menu initialization

The values set in the setting menu can be reset to the factory setting.
1
Select [LOAD FACTORY DATA] from [MENU] → [SYSTEM SETTINGS] → [INITIALIZE].
[MENU] setting values are reset to factory settings.
Chapter 10 Menu Operations — Setting menu display
– 134 –
a
b
c