Home Screen - Panasonic VariCam LT Operating Manual

HOME screen

The Home screen displays the basic camera settings and is used to change those settings.
[FPS]
[COLOR]
[SHUTTER]
[EI]
Chapter 5 Operation — HOME screen
Sets the frame rate.
Selects from the predefined frame rate.
Up to 150 (128 for [25.00p]/[50.00p]) can be registered.
Presets can be added/deleted using [ADD]/[DELETE].
[VFR]
Sets the video colors (gamma and gamut).
[MAIN COLOR]
[PROXY COLOR]
[Grading SEL]
[3D LUT]
[CDL]
[SDI SET]
Sets the shutter speed.
Selects from the predefined shutter speed.
Up to 12 can be registered.
Presets can be added/deleted using [ADD]/[DELETE].
[ON]/[OFF]
[deg/sec]
Sets the EXPOSURE INDEX (gain).
[dB/ISO]
[NATIVE ONLY]
[800BASE]
[5000BASE]
Toggles the variable frame rate.
When this is [OFF], the frame rate become 1x the rate set in [MENU] →
[SYSTEM SETTING] → [FREQUENCY].
f Perform recording at the frame rate set in [FPS] when [ON]. Audio cannot be
recorded.
Audio can be recorded on the sub recorder side when [NORMAL+Audio] is
selected in [MENU] → [SYSTEM SETTINGS] → [SYSTEM MODE] → [VFR
PROXY REC].
In this case, the sub recorder is in normal recording (frequency set in
[SYSTEM MODE] → [FREQUENCY]) rather than recording at a variable
frame rate.
Sets the color of main codec video to be recorded in the main recorder.
Sets the color of proxy codec video to be recorded in the main recorder and the
sub recorder.
Sets the grading function.
Enabled only when [MAIN COLOR] is set to [V-Log].
Use the color data (3D LUT and CDL) inside the camera recorder by selecting
[Internal].
Color data that is set from the grading application connected to the network can
be used by selecting [External App].
Sets the grading in the [3D LUT].
[Grading SEL] is disabled when this is [OFF].
When [Grading SEL] is set to [Internal] or [MAIN COLOR] is set to [SHADING],
and [MENU] → [SCENE FILE SETTINGS] → [GAMMA] → [GAMMA SELECT]
is set to [V-Log], the 3D LUT data will be read from the SD memory card.
The 3D LUT data is set from the grading application connected to the network
when [Grading SEL] is set to [External App].
f [LOAD/SAVE] allows to read from or save to the SD memory card.
Sets the grading in [CDL].
[Grading SEL] is disabled when this is [OFF].
When [Grading SEL] is set to [Internal]
f Sets [Slope]/[Offset]/[Power]/[Saturation] on the control panel.
f [LOAD/SAVE] allows to read from or save to the SD memory card.
The CDL data can not be changed during recording when [Grading SEL] is set
to [Internal]. The data can be changed from the grading application even while
recording when [External App] is set.
The CDL data is set from the grading application connected to the network
when [Grading SEL] is set to [External App].
Sets the display color for [SDI OUT 1]/[SDI OUT 2]/[VF SDI].
The settings can only be changed when [MAIN COLOR] is set to [V-Log].
It will be shutter off (opening angle 360 deg) when set to [OFF].
Determines the shutter setting unit.
[deg]: Open angle
[sec]: Second
Selects the setting method.
Only the native ISO can be selected. (when [ISO] is set)
The ISO800 standard value can be selected. (when [ISO] is set)
The ISO5000 standard value can be selected. (when [ISO] is set)
– 91 –