[File] - Panasonic VariCam LT Operating Manual

Item
[OPEN IRIS FOCUS [OPEN IRIS FOCUS
ASSIST] SW]
[VALUE]
[VF SDI EI ASSIST] [ZEBRA SW]
[- ZEBRA1 DETECT]
[- ZEBRA2 DETECT]
[- ZEBRA2]
[WFM SW]
[- TYPE]
[- TRANSPARENCE]
[Y GET SW]
[- UNIT]
[- AREA SIZE]
[FALSE COLOR SW]
[SMOOTH MODE]
[TEST SIG] [TEST SIG SEL]
[COLOR BARS TYPE]

[FILE]

Performs file-related operations such as reading/writing menu settings data from/to an SD memory card.
Item
[SCENE FILE] [LOAD(SD CARD)]
[SAVE(SD CARD)]
[SAVE AS(SD CARD)]
[SETUP FILE] [LOAD(SD CARD)]
[SAVE(SD CARD)]
[SAVE AS(SD CARD)]
Chapter 10 Menu Operations — Menu list
Switches enable/disable of the open iris focus assist function.
[ON], [OFF]
f Factory setting: [OFF]
Sets the time for the open iris focus is to assist.
[10SEC], [30SEC]
f Factory setting: [10SEC]
Sets if the zebra signal is superimposed or not to the output from the <VF SDI> terminal.
[ON], [OFF]
f Factory setting: [OFF]
Sets the detection level of zebra pattern 1.
[0%] - [109%]
f Factory setting: [80%]
Sets the extraction level of zebra pattern 2.
[0%] - [109%]
f Factory setting: [100%]
Enables/disables zebra pattern 2 and selects [SPOT].
[ON], [SPOT], [OFF]
f Factory setting: [OFF]
Displays/hides waveform monitor.
[ON]/[OFF]
f Factory setting: [OFF]
Sets the display format of the waveform monitor.
[Y], [YGBR]
f Factory setting: [Y]
Sets the transparency of the waveform monitor display.
[0%], [25%], [50%], [75%]
f Factory setting: [50%]
Switches enable/disable of the Y GET display function.
The user box function will not operate when [Y GET SW] is set to [ON].
[ON], [OFF]
f Factory setting: [OFF]
Sets the [Y GET] display unit when [MENU] → [SYSTEM SETTINGS] → [COLOR SETTINGS] → [MAIN]
is set to [V-Log].
It will be fixed to [%] when [MENU] → [SYSTEM SETTINGS] → [COLOR SETTINGS] → [MAIN] is set to
anything other than [V-Log].
[STOP], [%]
f Factory setting: [STOP]
Sets the size of area to detect with the Y GET display function.
[S], [M], [L]
f Factory setting: [M]
Switches display/hide of the false color.
[ON], [OFF]
f Factory setting: [OFF]
Switches enable/disable of the smooth mode (a function to smooth the video of the viewfinder when the
24P, half shutter function is operated).
[ON], [OFF]
f Factory setting: [OFF]
Sets the test signal output.
It will not operate when [MAIN PIXEL] is set to [2048×1080 CROP] or [1920×1080 CROP].
[OFF]: Does not output a test signal.
[BARS]: Outputs the color bar set in [COLOR BARS TYPE].
f Factory setting: [OFF]
Sets the color bar to be used.
[SMPTE]: Uses the color bar of the SMPTE standard.
[FULL]: Uses the full color bar.
f Factory setting: [SMPTE]
Selects the scene file saved in the SD memory card and loads it into the camera.
Overwrites the current setting value in the camera to the file selected from the file list of the scene files
saved in the SD memory card.
Saves the current setting value in the camera as a new scene file in the SD memory card by entering the
file name/title name.
Selects the setup file saved to the SD memory card and to be read in the camera.
Overwrites the current setting values in the camera to the file selected from the setup file file list saved to
the SD memory card.
Enters a file name or title name for the file containing the current setting values of the camera and saves it
in the SD memory card as a new setup file.
– 160 –
Description of settings
Description of settings