Handling Setting Data; File Structure Of The Setting Data; Handling Sd Memory Cards - Panasonic VariCam LT Operating Manual

Handling setting data

File structure of the setting data

The scene files ([SCENE1] to [SCENE5], and [SHADING]) can be saved in the camera according to the scene file number.
The scene file ([SCENE1] to [SCENE5], and [SHADING]) data can be saved as a file in the SD memory card, which can be loaded and used.
The setting value that can be saved as a scene file is the content of [MENU] → [SCENE FILE SETTINGS].
Setting data file structure of the camera is as follows.
r Scene file
(Factory settings)
(Current value)
(Value saved on the camera)
*1 Select [INITIALIZE] in [MENU] → [SCENE FILE SETTINGS] → [SCENE DATA].
*2 Select [LOAD] or [SAVE] in [MENU] → [SCENE FILE SETTINGS] → [SCENE DATA].
*3 Select [LOAD(SD CARD)] or [SAVE(SD CARD)] in [MENU] → [FILE] → [SCENE FILE].
[SCENE1] to [SCENE5], and [SHADING] at once.

Handling SD memory cards

The SD memory card can be removed and inserted, either before or after the power is turned on.
Inserting SD memory cards
1
Open the slot cover. (Fig. 1)
2
Insert the SD memory card with the label facing forward into the sub slot, and close the slot cover. (Fig. 2)
Chapter 9 Other Useful Functions — Handling setting data
[SCENE1] [SCENE2]
*1
[SCENE1] [SCENE2]
*2
[SCENE1] [SCENE2]
[SCENE1] [SCENE2]
[SCENE1] [SCENE2]
Fig. 1
The camera
[SCENE3] [SCENE4]
*1 *1 *1
[SCENE3] [SCENE4]
*2 *2 *2
[SCENE3] [SCENE4]
*3
SD memory card
Scene file 1
[SCENE3] [SCENE4]
Scene file 8
[SCENE3] [SCENE4]
– 123 –
[SCENE5] [SHADING]
*1 *1
[SCENE5] [SHADING]
*2 *2
[SCENE5] [SHADING]
[SCENE5] [SHADING]
[SCENE5] [SHADING]
Fig. 2