Panasonic VariCam LT Operating Manual page 153

Item
[CH2 LEVEL]
[CH3 LEVEL]
[CH4 LEVEL]
[CH1 VOL]
[CH2 VOL]
[CH3 VOL]
[CH4 VOL]
[CH1 LIMITER]
[CH2 LIMITER]
[CH3 LIMITER]
[CH4 LIMITER]
[HEADROOM]
[AUDIO OUTPUT] [MONITOR CH]
[MONITOR SEL]
[MONITOR DELAY]
[MONITOR VOL]
[ALARM]
Chapter 10 Menu Operations — Menu list
Sets if the recording level adjustment method for audio channel 2 is to be automatic or manual.
[AUTO]: Adjust automatically.
[MANUAL]: Enables manual adjustment.
f Factory setting: [AUTO]
Sets if the recording level adjustment method for audio channel 3 is to be automatic or manual.
[AUTO]: Adjust automatically.
[MANUAL]: Enables manual adjustment.
f Factory setting: [AUTO]
Sets if the recording level adjustment method for audio channel 4 is to be automatic or manual.
[AUTO]: Adjust automatically.
[MANUAL]: Enables manual adjustment.
f Factory setting: [AUTO]
Adjusts with this item when the recording level adjustment method for audio channel 1 is [MANUAL].
[0] - [100]
f Factory setting: [70]
Adjusts with this item when the recording level adjustment method for audio channel 2 is [MANUAL].
[0] - [100]
f Factory setting: [70]
Adjusts with this item when the recording level adjustment method for audio channel 3 is [MANUAL].
[0] - [100]
f Factory setting: [70]
Adjusts with this item when the recording level adjustment method for audio channel 4 is [MANUAL].
[0] - [100]
f Factory setting: [70]
Switches enable/disable of the audio channel 1 limiter when the audio recording level adjustment method
for audio channel 1 is [MANUAL].
[ON], [OFF]
f Factory setting: [OFF]
Switches enable/disable of the audio channel 2 limiter when the audio recording level adjustment method
for audio channel 2 is [MANUAL].
[ON], [OFF]
f Factory setting: [OFF]
Switches enable/disable of the audio channel 3 limiter when the audio recording level adjustment method
for audio channel 3 is [MANUAL].
[ON], [OFF]
f Factory setting: [OFF]
Switches enable/disable of the audio channel 4 limiter when the audio recording level adjustment method
for audio channel 4 is [MANUAL].
[ON], [OFF]
f Factory setting: [OFF]
Sets the headroom (standard level).
[18dB], [20dB]
f Factory setting: [20dB]
Sets the audio channel to be output from the <PHONES> terminal.
The display channel of the audio level meter and the channel for the audio volume are also switched in
conjunction.
This will be the operation target channel for the direct volume control.
[CH1/2]: Outputs audio channel 1/2.
[CH3/4]: Outputs audio channel 3/4.
f Factory setting: [CH1/2]
Sets the audio format (mono, stereo, mix) to be output from the <PHONES> terminal.
When [MONITOR CH] is set to [CH1/2]:
[MONO CH1], [MONO CH2], [STEREO CH1/2], [MIX CH1/2]
When [MONITOR CH] is set to [CH3/4]:
[MONO CH3], [MONO CH4], [STEREO CH3/4], [MIX CH3/4]
f Factory setting: [STEREO CH1/2]
Sets whether to delay the audio from the <PHONES> terminal to match the monitor output.
[ON], [OFF]
f Factory setting: [OFF]
Adjusts the level of audio to be output from the <PHONES> terminal.
[0] - [100]
f Factory setting: [70]
Sets the volume of the warning sound to be output from the <PHONES> terminal.
[LOUD], [MEDIUM], [SMALL], [OFF]
f Factory setting: [MEDIUM]
– 153 –
Description of settings