Panasonic VariCam LT Operating Manual page 139

Item
[USER8]
[USER9]
[USER10]
[USER GRIP1]
[USER GRIP2]
[LENS RET SW]
[SIDE LOCK] [REC(FRONT)]
[USER1/PLAY]
[USER2/INFO]
[USER3/EXT]
[IRIS/SEL]
[MENU]
Chapter 10 Menu Operations — Menu list
Sets the function to be assigned to the control panel operation button. The control panel operation button
functions as a USER button.
Assign [SIX USER BUTTONS] to the <USER 1> to <USER 3> buttons.
[INHIBIT], [EXPAND1], [EXPAND2], [OPEN IRIS F.A.], [IN COLOR F.A.], [SQ. F.A.], [MONO F.A.],
[FALSE COLOR], [VF SDI COLOR], [SDI OUT 1 COLOR], [SDI OUT 2 COLOR], [SMOOTH MODE],
[VFR SW]
f Factory setting: [INHIBIT]
Sets the function to be assigned to the control panel operation button. The control panel operation button
functions as a USER button.
Assign [SIX USER BUTTONS] to the <USER 1> to <USER 3> buttons.
[INHIBIT], [EXPAND1], [EXPAND2], [OPEN IRIS F.A.], [IN COLOR F.A.], [SQ. F.A.], [MONO F.A.],
[FALSE COLOR], [VF SDI COLOR], [SDI OUT 1 COLOR], [SDI OUT 2 COLOR], [SMOOTH MODE],
[VFR SW]
f Factory setting: [INHIBIT]
Sets the function to be assigned to the control panel operation button. The control panel operation button
functions as a USER button.
Assign [SIX USER BUTTONS] to the <USER 1> to <USER 3> buttons.
[INHIBIT], [EXPAND1], [EXPAND2], [OPEN IRIS F.A.], [IN COLOR F.A.], [SQ. F.A.], [MONO F.A.],
[FALSE COLOR], [VF SDI COLOR], [SDI OUT 1 COLOR], [SDI OUT 2 COLOR], [SMOOTH MODE],
[VFR SW]
f Factory setting: [INHIBIT]
Sets the function to be assigned to the <USER GRIP1> button of the grip module.
[INHIBIT], [SIX USER BUTTONS], [AWB], [Y GET], [EXPAND1], [EXPAND2], [OPEN IRIS F.A.], [IN
COLOR F.A.], [SQ. F.A.], [MONO F.A.], [WFM], [BARS], [ONE PUSH A. IRIS], [FALSE COLOR],
[ZEBRA], [VF SDI COLOR], [SDI OUT 1 COLOR], [SDI OUT 2 COLOR], [VF SDI CLEAN], [VF SDI
MARKER], [VF SDI DESQUEEZE], [VF SDI IMAGE INVERT], [SMOOTH MODE], [TEXT MEMO],
[SHOT MARK], [REC SW], [AUDIO MON VOL], [AUDIO IN VOL], [AUDIO MONITOR CH], [DIRECT
VOL CTRL], [VFR SW], [RETURN]
Even if [BARS] is assigned, this item will not operate when [MAIN PIXEL] is set to [2048×1080 CROP]/
[1920×1080 CROP].
The color bar is not output from the <SDI OUT 1>/<SDI OUT 2> terminal even if [BARS] is assigned when
[MENU] → [SYSTEM SETTINGS] → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF].
f Factory setting: [INHIBIT]
Sets the function to be assigned to the <USER GRIP2> button of the grip module.
[INHIBIT], [SIX USER BUTTONS], [AWB], [Y GET], [EXPAND1], [EXPAND2], [OPEN IRIS F.A.], [IN
COLOR F.A.], [SQ. F.A.], [MONO F.A.], [WFM], [BARS], [ONE PUSH A. IRIS], [FALSE COLOR],
[ZEBRA], [VF SDI COLOR], [SDI OUT 1 COLOR], [SDI OUT 2 COLOR], [VF SDI CLEAN], [VF SDI
MARKER], [VF SDI DESQUEEZE], [VF SDI IMAGE INVERT], [SMOOTH MODE], [TEXT MEMO],
[SHOT MARK], [REC SW], [AUDIO MON VOL], [AUDIO IN VOL], [AUDIO MONITOR CH], [DIRECT
VOL CTRL], [VFR SW], [RETURN]
Even if [BARS] is assigned, this item will not operate when [MAIN PIXEL] is set to [2048×1080 CROP]/
[1920×1080 CROP].
The color bar is not output from the <SDI OUT 1>/<SDI OUT 2> terminal even if [BARS] is assigned when
[MENU] → [SYSTEM SETTINGS] → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF].
f Factory setting: [INHIBIT]
Sets the function to be assigned to the <RET> button of lens.
[INHIBIT], [RETURN], [EXPAND1], [EXPAND2], [IN COLOR F.A.], [SQ. F.A.], [MONO F.A.]
f Factory setting: [RETURN]
Sets if the <REC> button on the camera is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f Factory setting: [UNLOCK]
Sets if the <USER1>/<PLAY> button is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f Factory setting: [LOCK]
Sets if the <USER2>/<INFO> button is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f Factory setting: [LOCK]
Sets if the <USER3>/<EXT> button is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f Factory setting: [LOCK]
Sets if the <IRIS/SEL> dial button is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f Factory setting: [LOCK]
Sets if the <MENU> button is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f Factory setting: [LOCK]
– 139 –
Description of settings