Delete All Data; Call Rejection Setting - Fujitsu Docomo F-07F Instruction Manual

Lock/Security
Incoming call restriction

Call rejection setting

Call reject setting allows you to reject calls from
phone numbers not saved in phonebook and
reject or accept calls from the specified numbers.
In addition, you can set a receiving operation for
each reason for hiding caller ID.
a meg TEL functioned Dial/
Receive call settingei Call rejection
settingePerform target operation
Rejecting unregistered calls :
aeAuthenticateea or b
Setting to reject/accept incoming calls from
specified numbers :
a - c
Setting for anonymous, payphone,
unavailable incoming calls : c -
AuthenticateeSet each item
Point
Unregistered caller setting is available for calls
showing caller ID. For calls hiding caller ID, receiving
operation is performed according to the call reject
setting for Anonymous, Payphone, Unavailable. It is
recommended that you use both Caller ID request
and call reject setting for Anonymous, Payphone,
Unavailable.
The reasons for hiding caller ID are as follows:
Anonymous : a call with hiding caller ID set
Payphone : a call from public payphone, etc.
Unavailable : a call unavailable to notify caller ID
such as an overseas call or call from land-line
phone using call forwarding service, etc.
beAuthenticatee
ee
Lock/Security
Resetting to default
Reset
Reset to default.
meh Settingei Other
a
d ReseteAuthenticateeSelect an
item to reseteC [Reset]e"Yes"

Delete all data

You can delete data saved in FOMA terminal, and
restore the each function's settings to the default.
meh Settingei Other
a
c Delete all
dataeAuthenticatee
"Yes"
All data is deleted while restarting. Do not turn
power off until the stand-by display is
displayed.
Point
Even after all data is deleted, the data registered by
default is not deleted.
settinge
settinge
39