Available Data Type; Specific Absorption Rate Of Mobile Phone - Fujitsu Arrows ef FJL21 Basic Manual

Number of effective Approx. 1.2 million pixels
pixels: In-camera
Digital zoom Up to approx. 10.2 x (32 levels)
®
Wireless LAN (Wi-Fi ) IEEE802.11a/b/g/n compatible (for Wi-Fi
function tethering, IEEE802.11b/g/n)
®
Bluetooth Compatible Bluetooth
function version
*1 Continuous standby time indicates the estimated standby time when radio wave
reception is normal. Due to battery charging condition, function settings,
operating environment such as ambient temperature, radio wave conditions in
the area of use (the radio waves are weak or absent), etc. standby time may be
reduced to about half.
*2 Continuous call time indicates the estimated time that the phone can send and
receive radio waves normally.
*3 It is confirmed that the FJL21 and all Bluetooth
®
Bluetooth standards designated by Bluetooth
authenticated. However, procedures may differ or data transfer may not be
possible depending on the device's characteristics or specifications.
Available data type
FJL21 supports view/play of the following file formats.
Data
Audio 3GPP, MPEG-4, ADTS raw AAC, MPEG-TS, FLAC,
MP3, MIDI Type 0 and 1, RTTTL/RTX, OTA,
iMelody, Ogg, Matroska, WAVE, WMA
Still images JPEG, BMP, GIF, PNG, WEBP
Videos WMV9, H.264, H.263, MPEG4, VP8
Specific Absorption Rate of Mobile Phone
Specific Absorption Rate of Mobile Phone
This model FJL21 mobile phone complies with Japanese
technical regulations and international guidelines regarding
exposure to radio waves. This mobile phone has been
designed in observance of the Japanese technical
®
®
*3
standard Ver.4.0
®
devices are compliant with
®
SIG, and they are
File format
regulations regarding exposure to radio waves
to exposure to radio waves recommended by equivalent
international guidelines.
These international guidelines were set out by the
International Commission on Non-Ionizing Radiation
Protection (ICNIRP), which is in collaboration with the World
Health Organization (WHO), and the permissible limits
include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health condition.
The Japanese technical regulations and international
guidelines define the limits using a unit of measurement
known as the Specific Absorption Rate (SAR), which
represents the average amount of radio frequency energy
absorbed by the human head. The SAR limit for mobile
phones is 2.0 W/kg. The highest SAR value for this mobile
phone when tested for use at the ear is 0.439 W/kg. There
may be slight differences in SAR levels among individual
products, but they all satisfy the limit. The actual SAR of
this mobile phone while talking on the phone can be well
below that indicated above. This is due to automatic
changes in the power level of the mobile phone to ensure it
only outputs the minimum power required to communicate
with a base station. Therefore in general, the closer you are
to a base station, the lower the power output of the mobile
phone.
This mobile phone can be used in positions other than
against your ear. This mobile phone satisfies the
international guidelines when used with au Carrying Case F
Black (0105FCA) (sold separately) recommended by KDDI
*2
.
In case you are not using the au Carrying Case F Black
(0105FCA) (sold separately), use a product that contains
no metal parts, and one that can hold the mobile phone at
least 1.5 cm away from your body.
*1
and limits
61