Understanding Video Channels Results; Figure 117 Autotest - Video Autotest; Figure 118 Autotest - Video Autotest Results; Table 41 Home Certification Test Results - JDS Uniphase DSAM-3500 User Manual

21128026 R001 DSAM Help User Guide.book Page 125 Thursday, February 5, 2009 2:02 PM
Understanding Video
Channels Results
DSAM Help User Guide
Figure 117 AutoTest – Video AutoTest
Figure 118 AutoTest – Video AutoTest Results

Table 41 Home Certification Test Results

Name Description
Overall Results This area displays the overall pass/fail results for
the test, the limit set applied (if applicable), and the
currently selected channel.
Individual Test This area displays the results of individual tests for
Results the currently selected channel. When a measure-
ment falls outside the acceptable range, an arrow to
the right of the numeric value indicates the direction
in which the failure occurred. An up arrow indicates
a measurement over the limit range. A down arrow
indicates a measurement below the limit range.
Rev. 001
Chapter 7 AutoTest Mode
AutoTests Tab
Overall Results
Individual Test Results
Overall Channel Results
125