Page 1
Cloning DSAM’s Soft keys METER # 1 METER # 2 To send settings from Meter #1 to Meter #2: 1.) Connect the meters The Ethernet port is located at the top of the meter. Use an Ethernet crossover cable to...
Page 2
Under the Configure Screen on METER #1 and METER #2 highlight clone. 2.) Prepare METER #1 for cloning. 3.) On the CLONE- WHAT WOULD YOU LIKE TO DO? Screen, use the arrow keys to highlight send from this meter and press Select softkey.
Page 3
10. Meter #2 will receive data from Meter #1...